Raptor 30 V2 - DMT
Raptor 30 V2 - DMT
Raptor 30 V2 - DMT
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Changing tail rotor shaft:<br />
1. Remove the tail rotor gear box from the tail boom.<br />
2. Take apart the blade grips and remove or loosen the<br />
M3x18 set screws.<br />
3. Remove the tail rotor hub.<br />
4. Pull out the tail rotor shaft.<br />
5. Remove the plastic pulley by pushing out the 2mm<br />
steel pin. (2)<br />
(1)<br />
(4)<br />
(3)<br />
(5)<br />
34