Sub ject to change due to technical progress ... - REM Maschinen

SCREW COMPRESSORS
ESM Kompakt II range
Screw compressors from this range are small compressed air stations. Because of the small
dimensions these types of compressor are very good for installing in places where space is
limited. With a low level of noise (66 db) and almost no vibrations, this compressor provides
quality compressed air from 0.7 – 3.5 m3/min. With a new generation of screw and an MC2
micro processing unit with integrated air drying and filtering system, this compressor is a very
reliable producer of quality compressed air.
12.
10.
5.
6.
11.
7.
2.
13.
1.
8.
9.
14. 4.
3.
Main parts :
1. Electromotor (IP 55)
2. Screw block
3. MC2 – microprocessor unit
4. Air drying system with filters
5. Oil separator
6. Tank
7. Oil cooler with thermostat fan
8. Entering with air grill with filter
9. Soft start of the motor (star/
triangle)
10. Oil filter
11. Oil level control
12. Noise insulation from 63
to 66 dB(A)
13. Entering air valve
14. Pressure gauge
Preparation of compressed air
After compression the air goes into a bottle. Before sending the compressed air to the installation it is fast cooled in a
cooler with automatic condensation drainer for removing water from the compressor. With two filters the air is cleaned of
particles up to 0.01 microns. The compressed air prepared like this is convenient for all industrial processes. Dry and clean
compressed air plays an important part in providing a longer working life for pneumatic tools.
Technical specification
Micro processing unit MC2
This component of the compressor controls the operation of all units of the screw compressor, and all the parameters
of the working process. The unit prevents possible overheating of the screw pair when working in extreme temperatures
outside of the working area. On the LCD display of the MC2 unit there 4 rows display all working parameters and all service
activities to be undertaken. In the case of a problem arising during compressor operation this unit automatically stops the
power. With this MC2 unit its possible to change the working parameters shuts down the power to the compressor and can
also adjust it to needs of the working process.
MODEL PRESSURE AIR FLOW MOTOR POWER NOISE TANK CAPACITY DIMENSION WEIGHT
(bar) (m 3 /min) (kW/HP) (dB(A)) (l) (L×H×W, mm) (kg)
ESM 702 8/10/13/15 0,82/0,73/0,59/0,45 5,5/7,5 63 275 1180x615x1645 385
ESM 1002 8/10/13/15 1,24/1,04/0,85/0,67 7,5/10 64 275 1180x615x1645 390
ESM 1502 8/10/13/15 1,67/1,45/1,19/1,03 11/15 65 275 1180x615x1645 395
ESM 1802 8/10/13/15 2,05/1,75/1,53/1,2 15/20 66 275 1180x615x1645 400
ESM 702 8/10/13/15 0,82/0,73/0,59/0,45 5,5/7,5 63 500 1960x615x1645 445
ESM 1002 8/10/13/15 1,24/1,04/0,85/0,67 7,5/10 64 500 1960x615x1645 455
ESM 1502 8/10/13/15 1,67/1,45/1,19/1,03 11/15 65 500 1960x615x1645 460
ESM 1802 8/10/13/15 2,05/1,75/1,53/1,2 15/20 66 500 1960x660x1800 485
ESM 2002 8/10/13/15 2,35/1,98/1,65/1,35 15/20 66 500 1960x660x1800 705
ESM 2502 8/10/13/15 2,85/2,54/2,14/1,69 18,5/25 66 500 1960x660x1800 715
ESM 3002 8/10/13/15 3,3/2,98/2,55/1,9 22/30 68 500 1960x660x1800 720
ORIGINAL SPARE PARTS
61