Sub ject to change due to technical progress ... - REM Maschinen

SCREW COMPRESSORS
ESD, ESDI range
Direct drive screw compressors are designed for special requirements during production of compressed air. Due to the motor being directly
connected to the screw pair the following features are achieved;
• low noise level
• higher screw block utilization
• low vibrations
• longer life time of the screw block
• lower service costs
For most demanding users of compressed air the best solution is the ESDI range of screw compressors. In these types of compressors we have
direct connection between the motor and the screw block and a frequency regulator of motor rotation. This combination of technical solutions
is optimal for highly demanding users of compressed air.
Technical features of ESD compressors
• Working pressure 8, 10, or 13 bar
• Power of the motor from 75 kW up to 400 kW (starting from 315 kW water
cooling motor)
• Compressed air flow from 8.65 up to 465.95 m 3 /min
Technical features of ESDI compressors
• Working pressure from 5 up to 13 bar
• Power of the motor from 80 up to 260 kW
• Compressed air flow from 1.75 up to 41.50 m 3 /min
Direct drive
The direct transfer of the power between the motor and the screw block produces
low vibrations with maximum utilization. This type of design assures longer
useful life with reduced service costs and longer service intervals.
Various types of screw compressors can be used as complete compressed air
stations and fulfill different demands for compressed air. The capacity of the
compressed air station can be modified depending on specific needs for compressed
air and the required quality of air. The components integrated in the
compressor such as filters, dryer, automation parts, ecological oil separator,
etc. are of the best quality.
64
ORIGINAL SPARE PARTS