Sub ject to change due to technical progress ... - REM Maschinen

SCREW COMPRESSORS
ES II range
The compressors from this range are self standing with air flows of
over 3 m 3 /min. The area of application for these compressors is large
industrial consumers of compressed air. With a combination of new
screw pair, an MC2 unit and quality production of all other components,
these compressors are reliable machines for industrial applications.
Main parts of screw
compressor ES I I
1. Screw block
2. MC2 – microprocessor unit
3. Air/oil separator
4. Oil cooler
5. Oil filter
6. Entering air valve
7. Soft start of the motor
8. Vents for the air from the filter
9. Electromotor
10. Entering with air grill with
filter
11. Valve for minimal pressure
12. Thermostat valve
13. Noise insulated housing
14. Oil cooler with thermostat fan
15. Belt transmission
11.
1.
15.
9.
8.
6.
10.
2.
7.
3.
13.
4. 14. 5. 12.
Technical specification
MODEL PRESSURE AIR FLOW MOTOR POWER NOISE DIMENSION WEIGHT
(bar) (m 3 /min) (kW/HP) (dB(A)) (LxWxH, mm) (kg)
ES 3002 8/10/13/15 3,3/2,98/2,55/1,9 22/30 69 1800×710×1170 480
ES 4002 8/10/13 4,35/4,05/3,51 22/30 72 2020×1140×1420 540
ES 5502 8/10/13 6,25/5,75/4,85 37/50 72 2020×1140×1420 770
ES 7002 8/10/13 8,1/7,1/5,5 45/60 73 2020×1140×1420 780
ES 8002 8/10/13 8,88/7,5/6,58 55/75 72 2010×1465×1810 1150
ES 11002 8/10/13 12,4/11,15/10,6 75/100 72 2010×1465×1810 2000
ES 13002 8/10/13 14,5/13,5/11,9 90/125 74 2010×1465×1810 2100
ES 16002 8/10/13 18,3/16,1/14,45 110/150 − 2300×1400×1525 2300
ES 19502 8/10/13 21,98/19,4/16,9 132/180 − 2300×1400×1525 2800
ES 24502 8/10/13 26,85/24,65/21,2 160/220 − 2300×1400×1525 3200
ES 28002 8/10/13 31,96/28,12/23,98 200/270 − 3000×1650×2025 3900
ES 35002 8/10/13 40,79/35,32/28,57 250/340 − 3000×1650×2025 4100
63
ORIGINAL SPARE PARTS