15.06.2014 Views

HP-505/503 Manual (PDF) - Roland

HP-505/503 Manual (PDF) - Roland

HP-505/503 Manual (PDF) - Roland

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Panel Descriptions<br />

Rear Panel and Bottom Panel (<strong>HP</strong><strong>503</strong>)<br />

MIDI Connectors<br />

You can connect these to<br />

external MIDI devices.<br />

Input Jacks<br />

If a digital audio player<br />

or other audio playback<br />

device is connected here,<br />

you’ll be able to listen to<br />

its playback through the<br />

<strong>HP</strong><strong>503</strong>.<br />

Use the controls of your<br />

audio playback device to<br />

adjust the volume.<br />

DC In Jack<br />

Connect the<br />

page 62<br />

included AC<br />

adaptor here.<br />

* Before making this connection,<br />

you must make sure that the<br />

[Power] switch is off.<br />

Pedal Connector<br />

Connect<br />

the pedal page 62<br />

cord of the<br />

dedicated stand to this<br />

connector.<br />

Rear side<br />

Output Jacks<br />

If you connect these jacks to<br />

amplified speakers, the sound<br />

of <strong>HP</strong><strong>503</strong> will be heard through<br />

them.<br />

Phones Jacks<br />

Here you can connect stereo headphones.<br />

The <strong>HP</strong><strong>503</strong> has two headphone jacks, two people can<br />

also use headphones simultaneously.<br />

Don’t forget to remove your headphone adaptor plug!<br />

If you leave a headphone adaptor plug inserted in<br />

the headphone jack, no sound will be heard from the<br />

piano. If you don’t hear sound from the piano, check<br />

the headphone jacks.<br />

12<br />

* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.<br />

* When connection cables with resistors are used, the volume level of equipment connected to the Input jacks may be low. If this happens, use connection cables that<br />

do not contain resistors.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!