MAN-MA35-e

Conditioning the Moisture Analyzer
Moisture in the air can condense on the surfaces
of a cold moisture analyzer whenever it is brought
into a substantially warmer place. If you transfer
the moisture analyzer to a warmer area, condition
it for about 2 hours at room temperature, leaving it
unplugged from AC power. Afterwards, if you keep
the moisture analyzer connected to AC power, the
constant positive difference in temperature between
the inside of the equipment and the outside will
practically rule out the effects of moisture condensation.
Setting up the Moisture Analyzer
§ Position the components listed below in the order
given:
– Pan draft shield
– Pan support
– Disposable sample pan
8