SCOTSMAN EUROPE SERVICE DEPARTMENT
SCOTSMAN EUROPE SERVICE DEPARTMENT
SCOTSMAN EUROPE SERVICE DEPARTMENT
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SCOTSMAN</strong> <strong>EUROPE</strong> <strong>SERVICE</strong> <strong>DEPARTMENT</strong><br />
SP-09.11 – JUNE ‘09<br />
MAR SERIES – MF 86-88<br />
CORRECT SETTING OF TIME<br />
DELAY RANGE ADJUSTING SCREW<br />
We would like to point you up about the correct setting of the adjusting range screw<br />
used on both the Compressor and Drive Motor Time Delay Part Nbr. EQ DAA51CM<br />
fitted into all MAR units as well as on MF 86/88 control box.<br />
To correctly operate the small arrow of the Range screw MUST be placed in<br />
correspondence of the setting time; in this position, when the Time Delay is in<br />
operation, (start up and trip off of the machine) the small yellow led blinks slow (2<br />
blinks per second).<br />
At contrary, if it’s NOT placed in the correct position, it looks like the Time Delay is<br />
still in operation (yellow led blinks fast – 5 blinks per second) but it’s not through as it<br />
remains all the time in this position w/out energize the Compressor or the Drive Motor<br />
relay.<br />
Attached a chart that we are going to place in each machine in order to alert the<br />
installer.
Change language