wk 780/2 (cR) - BGU Maschinen

chain-saw log pRocessoR
ksa 375 Z select
ksa 375 eZ select
automatic firewood processor with joystick
control for facilitated use and operation
• noiseless chainsaw operation
• hydraulic infeed belt, can be operated back and forth.
• own inbuilt hydraulics
• User-friendly operation thanks to an ergonomic joystick
control
• Belt conveyor swivelling 25° to the sides
• 2.30 m long infeed belt
Ergonomic control board
conveniently installed in a safe,
user-friendly position
A pressure regulator is installed
on the control board to conveniently
change the speed of the
chainsaw through the timber.
An hydraulic control valve is provided
for the infeed belt to step at
required stops. So, the length of
the cut-offs (logs) can be adjusted
at wish between 200 and 550 mm
by simply setting the valve to a
different position before starting
the machine. Timber jamming
during sawing is fully prevented
through the construction type.
Standard 6-way wedge
included in the basic processor
configuration.
ø 370
9 t
20 kW
Powerful electric motor
7.5 kW output power and 100%
power-on time equivalent to 9.5
kW input power. Designed for
use of KSA 375 EZ models by
connecting to the house power
network.
Equipped with automatic delta/
star switch for very convenient
machine start-up
Splitting softwood
Special V-shaped carriage makes
it easier to accommodate and
split small, crooked or deformed
timber that safely rolls down to
the bottom and therefore perfectly
centred against the wedge.
The figure show a splitting wedge
in its highest extended setting.
KSA 375 models are equipped
with a standard oil cooler
for trouble-free, continuous
operation even at high summer
temperatures.
Splitting wedge with mechanical
height adjustment
The splitting wedge can be easily
set at 6 different levels by using
an ergonomic hand lever.
A speed regulator is available
to set the belt conveyor to the
required rate for clearing logs
out the machine.
50