wk 780/2 (cR) - BGU Maschinen

accessories for
usp 13 / 16 / 22
hydraulic log lift
• recommended for large
logs. Dedicated valve for
up&down stroke operation.
oil is supplied from the
machine through oil pressure
lines.
Mechanical log lifter
gRuppenBeZeichnung
for Usp 13
Code no.: 94711
price excl. vAT:
price incl. vAT:
USP 13 H/6 3-point
hitch version (must
be attached to tractor
hydraulics)
USP 13 HZE/6 combination
version with
built-in hydraulics,
PTO and a 5.5 kW
electric motor
wheel arrangement, handling grip, log fenders and
hitch apparatus to class i and ii are standard!
USP 13 HZ/6 with builtin
hydraulics (power take
off from the tractor via
drive line).
for Usp 16 and Usp 22Code
no.: 94721
price excl. vAT:
price incl. vAT:
for Usp 16 and Usp 22 in
combination with FsW 750 D
Code no.: 94727
price excl. vAT:
price incl. vAT:
slip-on wedge
• For all Usp types 13, 16,
and 22.
for Usp 16 and Usp 22
Code no.: 94728
price excl. vAT:
price incl. vAT:
intermediate table
• For splitting short logs up
to 70 cm length. easy to
install.
• Fits all Usp types 13, 16
and 22 for splitting short
logs up to 70 cm length.
easy to install.
The ram stroke can be adjusted to a longer/
shorter one by means of the two self-locking
nuts w. black knob located on the ram control
rod.
Code no.: 94716
price excl. vAT:
price incl. vAT:
Code no.: 94717
price excl. vAT:
price incl. vAT:
The lower linkage pins are adjustable in 6
positions by simply sliding them out or tipping
them up/down as shown in the picture. This
system provides for universal hitching to any
kind of tractor Class I or II and is patented
with patent number 20 2005 011 915.6
An upper handle is located on the left-hand
side of the frame and used to secure the log
central under the wedge. At the same time
another handle on the right-hand side is
pushed down to control the cylinder valve.
The upper handle on the left side has a
holding and a control function.
Remote control winch
Fsw 750 d
• With hydraulic power drive
and sender with belt clip
(must be connected to
12 v. pull force: 750 kg.
30 m rope attaching to
BGU-holzspalter Usp 13.
oil is supplied from the
machine via oil pressure
lines. strictly possible on
factory original supplies, no
retrofitting.
differential tiller-bar
controlled steering
• For convenient transportation
of BGU log splitters
Usp 13 / Usp 16 / Usp 22
to a firm, smooth ground.
Code no.: 94757
price excl. vAT:
price incl. vAT:
Code no.: 96010
price excl. vAT:
price incl. vAT:
67