Mid-Mount Platform Manual
Mid-Mount Platform Manual
Mid-Mount Platform Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
OPERATION<br />
(4)<br />
(5)<br />
Set the wheel chocks in place. In back of the front wheels if facing uphill; in front of the rear wheels if<br />
facing downhill.<br />
Confirm that the CZIC display indicates that all beams are out and all jacks are down.<br />
3-2.5 Short Jacking on One Side.<br />
On occasion it may be necessary to set-up in a confined space where the stabilizers cannot be extended on one side.<br />
Operation shall and will be limited to the side where the stabilizers are fully extended.<br />
(1) On the short jack side, it will be necessary to extend the beam far enough to remove the safety pin from<br />
its storage bracket and install it into the jack assembly.<br />
(2) After completing the short jack procedure, a short jack graphic will appear on the CZIC display indicating<br />
a short jack condition.<br />
(3) If aerial operation is attempted on the unsafe side, the aerial will automatically stop, a WARNING will be<br />
displayed, and the control in that direction will no longer function.
Change language