AX3000G Owner's manual - Korg
AX3000G Owner's manual - Korg
AX3000G Owner's manual - Korg
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SETTING THE MIDI CHANNEL (GLOBAL “MIDI CH”)<br />
In order to exchange data with an external MIDI device, your <strong>AX3000G</strong>’s MIDI<br />
channel must match the MIDI channel of your external MIDI device. Here’s how to<br />
set the MIDI channel.<br />
1. Press the GLOBAL button.<br />
2. The name display will show “MIDI CH.” If a different parameter is selected,<br />
press the √/® buttons to change the display.<br />
3. Use the value knob 1 or the ▲/▼ buttons to set your <strong>AX3000G</strong>’s MIDI channel.<br />
4. Set the MIDI channel of your connected external MIDI device.<br />
HINT: For details on how to set the MIDI channel of your external MIDI device, refer<br />
to its owner’s <strong>manual</strong>.<br />
PROGRAM CHANGE (GLOBAL “PCHG OUT”)<br />
When you switch programs on the <strong>AX3000G</strong>, a program change message is transmitted<br />
from the MIDI OUT jack, causing an external MIDI device to switch programs.<br />
Similarly, when the <strong>AX3000G</strong> receives a program change message, its<br />
program will switch automatically.<br />
Here’s how you can specify whether a program change message will be transmitted<br />
from the MIDI OUT jack when you switch programs on your <strong>AX3000G</strong>.<br />
NOTE: Program change numbers not used by the <strong>AX3000G</strong> will be ignored. For<br />
details on the range of program change numbers used by the <strong>AX3000G</strong>, refer to<br />
End of this <strong>manual</strong>.<br />
1. Press the GLOBAL button.<br />
2. Press the √/® buttons to make the name display show “PCHG OUT.”<br />
3. Specify whether program change messages will be transmitted. Use value<br />
knob 1 or the ▲/▼ buttons to make the desired setting.<br />
“OFF”: Program change messages will not be transmitted.<br />
“On”: Program change messages will be transmitted.<br />
CONTROL CHANGE (GLOBAL “CCHG I/O”)<br />
When you operate the EXPRESSION pedal, Control switch or program switches of<br />
the <strong>AX3000G</strong>, control change messages will be transmitted. This means that functions<br />
for the corresponding control change numbers on an external MIDI device can<br />
be controlled in realtime.<br />
Similarly, when the <strong>AX3000G</strong> receives control change messages from an external<br />
MIDI device, it will be controlled in the same way as if its own foot controller were<br />
operated.<br />
For a list of the functions that can be controlled from an external MIDI device, refer to<br />
step 4.<br />
Here you can specify whether the <strong>AX3000G</strong> will transmit and receive control change<br />
messages.<br />
49<br />
Introduction<br />
Panel Tour<br />
Setup<br />
Playing<br />
Creating<br />
and Storing<br />
Index Appendix Spec. MIDI/DIGITAL ESS Pedals Effect Type Tuner<br />
Factory<br />
settings<br />
Troubleshooting
Change language