1089ES Checktrode Impedance Meter Manual - Bio-Medical ...

SPECIAL NOTES FOR 1089 MKIII/ES WITH DB25, 25 PIN
CONNECTOR FOR ELECTRO-CAP INTERNATIONAL ELECTRODE
CAP MODEL 10-20
Electro-Cap and Lexicor use the same DB25 pin connector and the switch
positions are the same for both caps, except that Electro-Cap does not use positions 21 &
22. To test the earclip electrodes, plug them into the connectors on the front panel
(make sure that the connector from the electrode cap is not plugged in to the connector
on the back of the unit) and check the impedance between the two earclip electrodes.
SPECIAL NOTES FOR MINDSET USERS
Please note that Mindset does not use all of the electrodes mounted in the
Electro-Cap and Lexicor electrode caps. Please refer to your Mindset manual for further
information on this subject.