FS-4, FS-4 HD, FS-4 Pro, FS-4 Prod HD Portable DTE Recorders
FS-4, FS-4 HD, FS-4 Pro, FS-4 Prod HD Portable DTE Recorders
FS-4, FS-4 HD, FS-4 Pro, FS-4 Prod HD Portable DTE Recorders
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Quickstart<br />
Connecting a <strong>FS</strong>-4 to a DV/<strong>HD</strong> Camcorder<br />
Before performing this procedure, make sure you have installed and<br />
charged the battery, see “Installing / Removing the Battery Pack” on<br />
page 17.<br />
Step 1:<br />
Connect the supplied Firewire cable to the “DV I/O” connector<br />
on the top of the <strong>FS</strong>-4. (Only one end will match the plug in the<br />
<strong>FS</strong>-4.)<br />
Step 2:<br />
Locate the FireWire/DV/iLink (or similar) connector on your<br />
video camera. It is located in different places depending upon the<br />
brand of camera. If you are unclear of its location, consult your<br />
video camera manual.<br />
<strong>FS</strong>-4 Supplied with 6-pin to 4-pin FireWire Cable<br />
Some camcorders require a 6-pin to 6-pin FireWire, 1394, cable<br />
and the cable provided with the <strong>FS</strong>-4 will need to be replaced.<br />
Step 3:<br />
Step 4:<br />
Step 5:<br />
Connect the other end of the FireWire, 1394, cable to your video<br />
camera.<br />
Turn on the video camera.<br />
Turn on the <strong>FS</strong>-4.<br />
19