o_194635f126obtnbgsl3st122ka.pdf
14.10.2014 • Views
Share Embed Flag

o_194635f126obtnbgsl3st122ka.pdf

ePAPER READ
DOWNLOAD ePAPER
adrenalinemoto

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

START NOW

CONTROL & HANDLEBARS<br />

HANDLEBAR DIMENSION CHART<br />

Note: The following diagrams and terms explain how Biker’s Choice ®<br />

measures the handlebars listed in this catalog.<br />

Center Width<br />

• Horizontal dimension of the straight tubing between the lowermost<br />

bends in the bar<br />

• Measured on the top side of the bar<br />

Width<br />

• Overall width of the bars from end to end<br />

Rise<br />

• Vertical dimension (height) of the bar measured from the bottom to<br />

the highest point on the bar (viewed from the side with the front face<br />

of the bar positioned vertically)<br />

Pullback<br />

• Horizontal dimension from the front face of the bar to the rearmost<br />

point on the bar<br />

• Measured in a front to rear direction (viewed from the side with the<br />

front face of the bar positioned vertically)<br />

BIKER’S CHOICE ®<br />

Diameter<br />

Width<br />

Center<br />

Width<br />

Pullback<br />

Rise<br />

AUDIO<br />

WINDSHIELDS<br />

SEATS &<br />

SISSY BARS<br />

LUGGAGE<br />

EXHAUST<br />

FUEL & AIR<br />

CONTROL &<br />

HANDLEBARS<br />

BIKER’S CHOICE ®<br />

1-1/4” FAT RISER BARS<br />

• 1-1/4” thick<br />

• Smooth swaged design<br />

• Risers are 3-1/2” centers<br />

• Pre-drilled, dimpled for wiring<br />

• Works with all standard controls, grips and risers<br />

• Clearance for hydraulic clutch control<br />

• Polished and chromed finished<br />

• Welds at risers, polished smooth<br />

• Made in USA<br />

• 1/2-13 thread<br />

End Center<br />

Application Width Rise Width Pullback P/N Retail<br />

6” Riser 31” 6” 8.5” 7.5” 40-0275 $169.95<br />

8” Riser 31” 8” 8.5” 8.5” 40-0276 169.95<br />

10” Riser 31” 10” 8.5” 9.5” 40-0277 169.95<br />

BIKER’S CHOICE ®<br />

1-1/2” FAT RISER BARS<br />

• 1-1/2” thick<br />

• Risers are 3-1/2” centers<br />

• Pre-drilled, dimpled for internal wiring<br />

• Works with all standard controls, grips and risers<br />

• Polished and chromed finished<br />

• Welds at risers, polished smooth<br />

• Made in USA<br />

• 1/2-13 thread<br />

End<br />

40-0201<br />

Application Width Rise Pullback P/N Retail<br />

7” Riser 31.5” 8.75” 5.5 40-0201 $219.95<br />

9” Riser 31.5” 10.5” 7.5 40-0202 219.95<br />

40-0276<br />

40-0202<br />

CABLES<br />

FOOT<br />

CONTROLS<br />

WHEELS<br />

& TIRES<br />

CHASSIS &<br />

SUSPENSION<br />

SHEET METAL<br />

BRAKES<br />

INSTRUMENT<br />

& LIGHTING<br />

ELECTRICAL<br />

ENGINE<br />

PRIMARY<br />

DRIVE<br />

TRANSMISSION<br />

& FINAL DRIVE<br />

GASKETS, SEALS<br />

& HARDWARE<br />

Cables<br />

ON PAGE 439<br />

TRAILERS<br />

& RAMPS<br />

Wiring Kits<br />

ON PAGE 863<br />

48-2663<br />

3” Opening Width<br />

BIKER’S CHOICE ® Z HANDLEBARS<br />

• Chrome-plated<br />

• Accepts 1” controls<br />

• No dimple<br />

Top Opening End<br />

Description Width Width Rise Pullback P/N Retail<br />

1” Diameter 3” 29” 3” 3” 48-2663 $103.95<br />

1.25” Diameter 5.5” 25.5” 2.75” 3” 48-2664 154.95<br />

48-2664<br />

5.5” Opening Width<br />

CHEMICAL<br />

TOOLS &<br />

SUPPLIES<br />

GENERAL<br />

ACCESSORIES<br />

DISPLAY<br />

& PROMO<br />

385<br />

CONTROL & HANDLEBARS

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!