Bill of Quantity (BOQ) - UNDP

More documents

Recommendations

Info

ITB 2013-087 needed, all according to drawings, specifications, conditions and direct instructions by the Engineer or his representative. Suitable clean sand should be used for back-filling in layers (25cm max. each & compaction test 97%), selected from the approval excavated soil or imported. Prices shall includes supply, watering, compacting, transporting, testing and anywhere else, needed, all according to drawings, specifications, conditions and directed instructions by the Engineer or his representative. The contractor shall check and ascertain that the Benchmark used by him and its elevation is accurate and correct in all respects. The contractor shall check the surveying work. If correction is needed, the contractor has to redo the surveying work on his own. Contractor’s signature and stamp Page 6
ITB 2013-087 Item No. 1 Bill No 1: Roads Works Rehabilitation of Road No.10 Description Unit Qty. - The Contractor has to submit Detailed Shop Drawings to be approved by the Engineer before commencement of the work, and all required materials should be supplied as specified and subject to the Engineer approval. _All executed works must be documented in as Built Drawings, with connected By Total station in sample presented of GIS municipality department, also observe all existing points coordination. (This mission will be finished by Approval Surveying office). - The Contractor has to fix the underground services that may be damaged during his work. - The Contractor should include in his price the costs of sampling and testing as required and according to technical specifications and work requirement. - Price will include costs of removing and/or relocating of all obstacles such as debris, garbage, trees and existing services in addition to the required materials necessary for work completion according to engineer's instructions and specifications. - The Contractor should include in his price the costs of cut and removal of trees roots, backfilling, watering, and compaction in layers with clean sand as specified and according to the Engineer instructions, the price will also include relocation of Power, Telephone poles and networks to sidewalk. - Price will include costs of adjusting the levels of existing manholes (in any diameter) to suit the new situation. Replacing covers, frames, rings if defected and all materials and work required to complete the task. - The price will include costs of cutting and removing of the Existing Asphalt pavement layer and transporting the removed material to a site approved by the Engineer Unit Price (US$) Total (US$) 1.1 Clean, excavate, cut and fill with clean dune sand from natural ground level to the bottom of the sub-base layer design level carriageway for 3 meters wide from the edge of curbstone sidewalk in both sides along Road No.10 in carriageway. The work includes sidewalks, the clean 26cm under the top face of the curb stone for sidewalks. The work includes watering, compaction not less than 98% & CBR not less than 15%, all according to drawing and technical specifications. The price include remove all existing block fences or others which objected the execution of works in sidewalks. Also removed Existing crushed if any and saved in the site to reuse it according Engineer structures. All according to drawing and technical specifications. All tests as per specifications & Engineer Instructions. m 2 22000 Contractor’s signature and stamp Page 7
Page 1 and 2: ITB 2013-087 United Nation Developm
Page 3 and 4: ITB 2013-087 Contractor may, at his
Page 5: ITB 2013-087 9. OTHER CONTRACTOR’
Page 9 and 10: ITB 2013-087 Item No. 1.8 1.9 Descr
Page 11 and 12: ITB 2013-087 Item No. Description U

Bill of Quantity (BOQ) - UNDP

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?