Bill of Quantities - UNDP

ATLAS # 43734 - Terra Santa School 

Construction of Multi-Purpose Hall and finishing works at the Basement in the Terra Santa Kindergarten 

Item# Description Unit Qty. Rate Amount 

PART 1: Terra Santa (Mutli-Purpose Hall) BOQ 

(Bill - 01) EXCAVATION AND BACKFILLING 

Preamble: 

Excavations of all sites including external works cut and or fill in 

any kind of soil to required level approved by the engineer 

(reduced level) excavation and cut to the reduced level including 

scraping of the top soil and removal of trees and extra unsuitable 

soil. Price shall include any filling and backfilling with excavated 

suitable soil or and imported fill where required that shall be 

applied on layers 200 mm thick and compacted up to 95% 

according to modified AASHTO Density T–80. Excavation for 

foundations must be horizontal and straight at all directions and 

to the proper layer. If the excavation is not level, the price shall 

includefor casting plain concrete(B150) to straighten out any 

difference in leveling. 

1.01 Excavation to reduce levels. MC 200 

1.02 Structural excavation for all foundations including external 

foundations and tie beams. 

MC 1060 

1.03 2.00 m thick base course layer below foundations compacted in 

layers of 30cm maximum to achieve 100% compaction in 

accordance with modified AASHTO Density T–80. 

MC 1000 

TOTAL CARRIED TO SUMMARY 

Consultant: Diyar Consultants Co. Engeering Unit @ UNDP/PAPP 1/31




(Bill - 02) SKELETON WORKS - CONCRETE WORKS 

Pricing for concrete works shall include the following: 

1. All form works and shuttering in any form, shape and size. 

Making chamfered and curved edges, allowing for and making 

grooves and sleeves and the like; removal of forms and cleaning 

of all exposed tie wires and rods; making good chipped damaged 

surfaces and edges and all surface finishing. 

2. Supplying, Casting, vibrating and curing as per 

specifications. 

3. Approved additives and admixtures. 

4. Incurred costs on Concrete Mix Designs, Sampling, testing 

and providing test results certificates, storing and saving of 

samples, and preparation of bar bending schedules and 

workshops. 

5. Supplying reinforcement of any grade, size and length as 

detailed in the drawings, storing on site including cutting, bending 

and fixing in position and providing all tying wires, spacers, shop 

drawings, testing and bar bending schedules . 

6. Painting of exposed surfaces of underground reinforced 

concrete elements with two coats of latex bituminous emulsion as 

per specifications. Supply of Polyethylene sheets under slab-ongrade 

slabs (of 500 microns). 

7. Plastering (glance only), painting with two coats of Latex 

Bituminous Emulsion like Ready flex or equal and supplying 

dimpled membranes for basement retaining walls. 

8. Supplying concrete hardener (non metallic and chips from 

Bayer) from approved company(5 kg/m2) for slab on grade of 

parking area only as Manufacturer specifications. 

9. Steel bars used for alignment and fixing of reinforcement 

works, and extra steel added to assure proper detailing and 

safety. 

Measurement of Concrete elements shall be the net dimensions 

as detailed on the drawings. All recesses, openings and voids 

shall be deducted. 

Measurement shall be only for the visible surfaces of elements, 

overlapping and measuring items twice under separate headings 

shall not be allowed. 

Slabs are measured in meter square from the external line of 

concrete walls. 

2.01 Supply and Cast Plain Concrete; Blinding under foundations, 

footings for columns, walls and where directed by the engineer. 

(Grade 'B 200) Fc = 200 kg / cm2, (10 cm; Ten cm Thick 

minimum). (including external works) 

MS 450 





2.02 Supply, Cast and Vibrate Reinforced Concrete Grade 'B 300'. Fc 

300 kg / cm 2 with super plasticizer. The price does not include 

reinforcement but includes Metal scaffolding system for slab and 

beams and where required, as well as painting with two coats of 

Bituminous Latex Emulsion from an approved company for all 

elements under slab on grade (foundations, tie beams, columns 

and wall necks and the like). 

a) For Foundations and Footings. MC 250 

b) For Ground Beams. MC 30 

c) For Reinforced Concrete Walls Below slab-on-grade. MC 10 

d) For Column necks. MC 15 

2.03 Supply and Cast Reinforced Concrete Grade 'B 300'. Fc 300 kg / MS 460 

2.04 

2.05 

cm 2 with super plasticizer. For slab-on-grade; (Fifteen (15) cm 

thick), including surface leveling, finishing, polyethylene sheets 

500 micron, construction joints, 8 mm @ 20 cm c/c mesh and all 

related works. The price includes well compacted layer of 

levelling basecourse (15 cm thick). 

Supply and Cast Reinforced Concrete Grade 'B 300' for: 

a) Reinforced Concrete Walls. MC 60 

b) Concrete Columns. MC 80 

c) Concrete Stairs including (stairs, flights, and landings). MC 7 

Supply and Cast Reinforced Concrete Grade 'B 300' for 

suspended slabs. Price to include for projected beams, drop 

beams, other beams and projections. Price also includes 

supplying, laying and arranging cement blocks 40x20x30 cm for 

ribbed slabs. 

a) 26cm. thick concrete ribbed slabs. MS 490 

b) 15 cm thick suspended solid slab for staircase slab. MS 15 

2.06 Deformed high yield steel bar reinforcement of various 

diameters, characteristic strength FY=420N/mm2 for 

concrete reinforcement, as shown on drawings and 

according to specifications. 

TON 28 






(Bill - 03) STONE WORKS 

Preamble: 

Natural Stone Masonry: 

Assirah (60th layer) for walls, 5 cm white mofajjar or white 

matabbeh or of first quality stone with 25 cm height, stone 

cladding over reinforced concrete shear and retaining walls. Price 

to include concrete filling of plain concrete Grade B200, steel 

mesh Ø 8 and all fixing accessories. The price also includes 

plaster coats (Glans), extruded polystyrene sheets 3 cm thick 

(Randoban) and (10 cm thick) Hollow Concrete Block including 

R.C. lintels all over block walls, all Grooves for hidden radiators 

all R.C. lintel around, hidden & drop beams reinforced concrete 

columns and R.C. walls, concrete grade B300, pointing with white 

cement grout, water proofing additives, and cleaning at 

completion by sand blasting if required. Price shall also include all 

special and necessary stone pieces like various jambs, sills, 

pieces … etc and all necessary accessories (approved fixing … 

etc) and all related works., as well as any other reinforced 

element. 

3.01 Stone walls 30 cm width, moffajar or matabeh finish for one face MS 970 

stone walls as detailed in drawing. 

3.02 a) Supply and build polished cut stone Assirah first class MS 50 

copings (38 cm) width, 5 cm thickness with curved edges for roof 

parapet (as per details) D3/A12 fixed with cement and sand 

morter (1:3). Price to include pointing and all necessary additives 

and works. 

3.03 Assirah Stone Msamsam finish of first quality stone or 

equivalent with white cement grouts in accordance with 


a) Treads 50 mm thick and stair risers 30 mm thick as detailed MR 28 

in drawings. 

b) Stone tiles 5 cm thick. MS 180 

3.04 Supply and Build; Grade B '250' Concrete Pre-cast Curb Stone. 

Size (15x25x100) cm. Price to include excavation, casting of 

blinding (40x10) cm., struts (15x15) cm. of plain concrete Grade 

B '150', pointing and grouting Struts and concrete foundation and 

backing of curbs, all as Detailed in drawings, (Lowering curbs in 

entrance of ramps especially detailed for handicapped. 

MR 130 






(Bill - 04) CONCRETE BLOCK WORKS 

4 PREAMBLE. 

All works of this bill shall be of Concrete blocks Grade 35 of high 

quality standards and as per specifications. 

Block works shall be measured in meter square. The net 

measurement of the seen elevations, excluding all openings and 

voids more than 0.1 M. S. in area. 

No allowance for thickness used other than those shown in the 

drawings. 

Rates of Block works include:- 

- Vertical and horizontal joints. 

- Cement and mortar, 

- Galvanized angles and butterfly ties. 

- Closed end blocks at all ends, door and window jambs, 

lintels and the like. 

- R.C. B 300 for doors and windows’ jambs and lintels as 

shown in detailed drawings and as directed by the engineer. 

- Pointing of the uncovered block surfaces. 

- Concrete filling including reinforcing steel to cavities at 

quoins and door and window openings. 

- Lintels and bond beams to the full length of the wall, 20 cm. 

high and in the same wall thickness of reinforced concrete grade 

B-300 with required steel reinforcement , on top of doors and 

windows or at the height of 2.00 M. 

- and all needed works to complete the job as per drawings 

and specifications. 

The price to include grooves, walls ties and all necessary 

accessories. Rates shall include making grooves for hidden 

radiators and collectors with R.C. lintels all around. Also it 

includes painting the first course of the blocks with Bituminous 

Latex Emulsion material 

4.01 Supply and Build Precast Concrete Block Walls, ‘Grade 35' of MS 200 

any size blocks. 

a) Hollow Blocks 10 cm. Thick for partitions 

b) Ditto as above but 20 cm. Thick. MS 150 






(Bill- 05) PLASTERING WORKS 

5 PREAMBLE: 

PLASTERING to all surfaces shall be measured net, including 

openings, which are less than 0.25 Meter Sq. 

The price shall include for running rules, all narrow widths, for 

taking out joints on block walls or backing concrete face for key, 

for making good to frames around pipes and other fittings, 

plastering to jambs and reveals of openings, side of columns, 

window sills; all of which shall be measured as plastering. 

Price shall also include Expanded metal lath, angle beads at all 

appeared corners for the entire height, and plaster stops at 

opening edges, expansion joints, sills, labor, curing, erecting and 

dismantling of scaffoldings, additives, pigments and all incidentals 

required as specified and / or detailed on the Drawings. 

5.01 

20 mm thickness (min) in Three plaster coats. The price includes MS 1400 

all necessary angels, beads and expanded heavy duty galvanized 

metal wire mesh, strips at joints of different backgrounds edges, 

angels, ceiling and plastering along all electrical and mechanical 

installations and where required. 

a) Three coats internal plaster. 

b) Ditto as (a) above but for parapet on roof and whereever 

required, price to include water proofing additive . 

MS 120 






(Bill - 06) 

6 

TILING, FLOORING AND MARBLE WORKS 

PREAMBLE. 

· All tiling works (terrazzo, ceramics and marble) shall be 

measured net in square meters. Deducting all opening and voids 

more than 0.25 M.S. 

· Marble works for steps and treads of stairs shall be measured 

in linear meter. The tread, the riser, including the water stop 

“edge” . 

· Marble works for window sills and other openings shall be 

measured in square meter. 

· Rate shall include preparation of surfaces under tiles, Finnish 

to falls and cross falls, special tile peace’s for edges and the like, 

tile surface finishing, Plastic spacers. Pointing and cleaning and 

all incidentals as per specifications and drawings. 

6.01 Supply, Install and finish Pre-cast Terrazzo Tiles size (30x30x3) 

cm, with Italian marble chipping No.6 “samples to be approved by 

the architect” Price to include bedding and joining in cement and 

sand mortar, pointing with white cement, required sand fill, and on 

site grinding, polishing and cleaning also to include Terrazzo 

skirting size (30x7x1) cm from the same type and color of tiles. 

MS 460 

6.02 Supply and Install Porcelain Glazed Wall Tiles, size 20x20x0.6 

cm First choice and free from all defects. (Italian Class A made or 

equivalent). Price to include round edges tiles perimeters or 

approved angles and beads, cutting, patching around the 

services bedding in cement and sand mortar, grouting, pointing 

with colored acrylic grout and two coats of plaster with proper and 

approved adhesive material. All works shall be in accordance with 

drawings and specifications. 

Engineer shall approve color of tiles. 

MS 75 

6.03 Supply and Install Non-Slip Porcelain Floor Tiles. Size 40x40x0.8 

cm. 

First choice and free from all defects. (Italian “Class A” made or 

equivalent). Price to include Italian made skirting with curved 

edges (40x7x0.8) cm concrete bedding, in cement and sand 

mortar sand with cement filling (Grade B-100), pointing with 

approved type of acrylic colored grout and cleaning on site. Color 

shall be approved by Engineer. 

Price to include applying of two coats of cement base 

waterproofing material s from approved company for sanitary unit 

. 

6.04 Supply and Install polished hard local Marble (BirZeit brown stone 

or Abu Khabaz or equivalent) Class A Tiles size (40x40x3) cm for 

stair landings. Price to include skirting of the same marble as 

above size (40x7x2) cm. bedding cement mortar, grouting, and 

on site polishing. All as per drawings and specifications. 

MS 30 

MS 10 





6.05 Ditto as above but for Steps and Treads of Stairs. Treads of 3 cm MR 50 

thick and Risers of 2 cm. thick. Price shall include supplying and 

installing hard local marble for stair flight skirting in parallel setting 

to the nosing line at an average height of 12 cm. and 20 mm. 

thickness, and hard local marble water stop (5cm wide x 3cm 

thick fixed at the end of treads. Also the price to include filling 

under tiles with cement and sand 1:6 ratio, bedding in cement 

and sand mortar, grouting, pointing, polishing of face and all 

related works. 

Note: The measurement for each stair will be from the adjacent 

wall to the external edge of the water stop of that stair. 

6.06 

Local approved colored marble best quality fixed with cement and 

sand mortar, polished finish including grouting, curved edges, 

sealant and additives. 

a) 50 mm. thick polished local marble for window sills. MS 10 

b) 30 mm. thick polished for door thresholds MS 6 

TOTAL CARRIED TO NEXT SUMMARY 





(Bill - 07 ) CARPENTRY AND JOINERY WORKS 

PREAMBLE. 

Sizes of carpentry works given in the Bills of Quantities are 

finished sizes and shall be as per Drawings. 

Sizes of doors and other items mentioned in the Bills of 

Quantities shall allow for tolerance to suit the structural openings 

shown in the Drawings. 

· Wooden doors and pair of doors shall be measured in number 

for each structural opening, unless stated otherwise in the Bills of 

Quantities. 

· Blackboards shall be measured in number or in squared meters 

as mentioned in the Bills of Quantities. 

· Wall protection wooden rubbing rails shall be measured in linear 

meter. 

· Cloth hangers and hanger wooden base shall be measured in 

number or in linear meter as stated in the Bills of Quantities. 

Rates for carpentry and joinery work shall include: 

a) Shop and coordinated drawings. 

b) Frames, architrave, chalk holders and other holders and 20 

cm. high “U” shape kick plates. 

c) Allowance for plastering and tiling and the like. 

d) Cutting and fitting around obstructions, Bedding and painting. 

e) Grounds, blocking and backings. 

f) Plugging concrete, block work, and stone work, and making 

well. 

g) Ironmongery including cylindrical locks, handles, stoppers, 

screws, temporary fixing, re-fixing, oiling and adjusting. 

h) Providing three keys for each lock including tagging. 

i) Providing and fixing wall mounted wooden keys cabinet, 

(70x70x10) cm. varnish finished with all ironmongery including 

cylindrical lock. 

k) Steel legs, brackets, bearers and other supports including 

painting. 

l) Glass and glazing including cutting to size and putty. 

m) Fly screening including cutting to size. 

n) Preparing surfaces to receive finishes. 

o) Painting, varnishing, polishing, oiling, and the like, to any 

area or width in any location including work in multicolor and 

cutting in edges and putty. 

p) 10 master keys, 150 blankets, 30 different cylinders as well 

as doors closers to main entrance doors and toilets provided by 

the contractor. 

q) Metal and wooden doors shall not be measured until the 

contractor supplies all ironmongery and accessories to the site. 





7.01 Supply and Fix Wooden Doors 4.5 cm Thick single or double 

sashes. With (Frame). (4.5x4.5) cm Zan wood edging and 

(3.5x9.5) cm soft wood stile. Edge strip banding of with 6 mm. 

thick plywood veneer on both sides (laminated with Zan Texture), 

door paneling to be of soft wood (4.5x3.5) cm, subframes 

(softwood) 5 cm thick and frames of hardwood (Zan) width 

according to the wall thickness’ and Allowance of 4-6 cm. 

thickness for plastering and tiling purposes, emerged in wood 

preservative before erection then embedded completely in sand - 

cement mortar and completely anchored as per specification. 

Architrave of Hardwood (Zan) (10x1.2) cm, price to include 

ironmongery (UNION Type, Domicile or equivalent), kick plates of 

stainless steel 20 cm height for bath room doors (U shaped both 

sides), and at the bottom door stoppers, glass 6 mm thick for 

vision panel, gaskets cylindrical Lock (UNION, Domicile or 

equivalent) and painting in three coats of oil paint in addition to 

primer coat. All as per Detailed Drawings, specification and 

instructions of supervisor engineer. 

a) Standard opening size (160x220) cm. Door Type D2. No 2 

b) Standard opening size (80 x220) cm. Door Type D4. No 6 

c) Standard opening size (70x220) cm. Door Type D5. No 4 

d) Standard opening size (90x220) cm. Door Type D6. No 4 

7.02 Supply and install Parquet tiles 12 x1.8 cm including all 

necessary fitting and accessories needed. see detail A/A03 

7.03 Supply and install wooden opening for mechanical shafts as per 

details (D1/A24). 

MS 60 

NO 2 






(Bill - 08 ) STEEL AND ALUMINUM WORKS 

8 PREAMBLE:- 

Rates for metalwork shall include: 

- Preparing shop drawings, 

- Lugs, plugs, holdfasts and the like. 

- Gaskets, sashes, double weather strips and external silicon 

and internal mastic filling around frames. 

- Ironmongery including cylinders, cylindrical locks (Union or 

equal), stoppers, handles, temporarily fixing,re-fixing, oiling and 

adjusting. 

- Providing two keys for each lock and padlock including 

tagging. 

- Hardware including cramps, dowels and the like. 

- Glass and glazing including cutting to size, putty and rubber. 

- Preparing surfaces by rubbing, scraping and cleaning and 

brush painting one coat of primer before fixing. 

- Sealing and Hammer finish Painting to any area or width in 

any location including work in multicolor and cutting in edges. 

· Fly screens. All other accessories and incidentals required 

executing the work. 

· Measurement for aluminum windows and windows protection 

steel grills shall be as architectural opening. 

8.01 Supply, install and operate local made sliding Aluminum 

Windows, equivalent to Extrusion Section 7700, two and half runs 

for horizontal and vertical partitions, with protective electrostatic 

applied polyester powder paint of 70-80 microns. In color 

approved by the Engineer. 

Price to include double float clear glazed 4mm with tight space 

6mm, fly screens made of fiberglass, and all other accessories 

and fittings to complete works as per drawings and specifications. 

(Colored) 

a) Aluminum windows of Types (W1,W2,W4,W7,W8,W10) MS 50 

8.02 Ditto but in section 4400 or equal for hinged windows. 

MS 7 

a) Aluminum windows of Type (W5,W6). 

8.03 Ditto but in section 2200 or equal for fixed windows and doors 

double-glazed 4mm with tight space 9 mm. The outside layer of 

glass will be (Sicureet) type. 

a) Aluminum windows of Type (W3,W9) MS 18 

b) Aluminum Doors of type (D1) MS 14 

8.04 Supply and Fix Balustrades of seamless Steel profiles, as per 

Detailed Drawing. 

a) Stairs handrails of hollow steel profile (50x50x1.5) mm. Price MR 15 

to include fixing complete oil paint three coats in addition to 

primer coat. (Seen height 90 cm), hardwood handrail zan 

including fixing ironmongery painting. Price coat under coat putty 

and two coats of oil paint with two coats of lacquer paint over one 

primer coat. 

b) Ditto as (a) above but for Terrace of hollow steel profile 

(50x50x1.5) mm. (Structural Height 46 cm.) but without Hard 

wood Hand Rail. Price to include oil paint three coats in addition 

to primer coat. 

MR 35 





8.05 Ditto as item 8.04(a) above, but from galvanized pipes 2" thick 

1.5 m height for the Handicapped ramp as per details D1/A39. 

Price to include oil paint three coats in addition to primer coat. 

MR 13 

8.06 Supply and install 4 cm thick steel doors from inside isolation. 

Price includes sub-frames, fixing, ironmongery, (union 

cylinder,domicile or equivalent) 5 Master Keys, 10 different 

cylinders, door closer, glazing if required, painting (prime coat 

“Rust Proof” under coat putty and two coats of oil paint (minimum) 

and accessories complete. 

a) Steel Door Type D7 (180x245) . No 2 

b) Steel Door Type D8 (90x208). No 1 

8.07 Steel Protection for windows and doors: 

Supply and fixed steel protection for windows and doors. Price to 

include fixing complete, ironmongery, cylindrical locks handles 

(somicile,union or equivalent For the doors) and all the 

accessories, also includes oil paint in three coats in addition to 

two primer coats as per drawings and specifications. 

a) Steel protection for windows. MS 50 

b) Steel protection for doors. MS 11 






(Bill - 09 ) PAINTING AND DECORATION WORKS 

9 PREAMBLE: 

Painting and decorating to walls, ceilings and the like shall be 

measured net in meter square. 

Painting to other works shall be included in the related items. 

Paints shall be supplied to site in sealed container, as approved 

by the Engineer, and site mixing shall not be permitted. 

The Contractor rates shall include for supply of all materials, 

workmanship, samples, primers, surface preparation, protection 

of painted surfaces, application to all heights as required of 

works, repair of all damaged surface at the contractor’s 

expenses, and all other requirements as stated in the 

Specifications. 

For application to walls using the coats of putty for the entire 

area of the wall as per satisfaction of the supervisor engineer. 

9.01 Supply and paint Emulsion PVA-Based Paint, for interior walls. Of 

high quality (Delux or equivalent) on one priming coat and two 

finishing coats with water proof additives. 

Color to be approved by the engineer. 

9.02 Supply and paint three coats Polycide paint for ceilings of high 

quality (Delux or equivalent). 

Color to be approved by the engineer. 

9.03 Supply & paint three coats of supercryle Paint (Delux or 

equivalent) for external walls exposed to weather conditions and 

where ever needed, and directed by the engineer and according 

to drawings and specifications. 

MS 1200 

MS 195 

MS 135 

9.04 Supply and install 60/60/2 cm false ceiling tiles type ecophene or 

approved equal, with galvanized oven painted white color 

supports T section and angels type ecophene (M67) … etc. The 

price includes channels or boxes for light fixtures vertical rod 

hangers with clips accessories complete (Type Ecophon 

Combison E, or approved equal) and perforated 60/60 cm 

Aluminum Panels Ecohon I.F.C. or approved equal (inside 

bathroom). The price includes supplying and installing Gypsum 

board (Master Alpha or approved equal) connecting between 

walls and false ceiling works including all fittings and suspension 

system such as sturdy hangers …etc. All to be submitted to 

engineers approval . See detail A32. 

MS 260 






(Bill - 10 ) NSULATION, ROOFING AND EXPANSION JOINTS 

10 PREAMBLE: 

All finishes shall be measured superficially net unless otherwise 

stated clearly. 

All finishes, except triangular shaped fillets and cement and sand 

lining to gutters, shall be measured superficially. 

Triangular shaped fillets and cement and sand lining to gutters 

shall be measured in linear meter, unless otherwise stated 

clearly. 

Rates for cement and sand work shall include for: 

Hacking concrete, applying cement slurry or raking out joints of 

block work to form key. Application to any surface. 

Finish to surface, to falls, cross-falls and currents. 

Forming bays including joints. Finish to edges and arises. 

Making good around steel sections, pipes, tubes, bars, brackets, 

outlets, and the like. 

Measurement for water proofing shall be for horizontal sectional 

roof area between parapet walls only. 

Rates for waterproofing and roof sheeting shall include for: 

Preparation of surface, cutting in edges. Overlaps priming and 

treatment at the corners and floor drains. 

Dressing over parapets and stub columns including forming 

groove to receive edge of plasticized bitumen membrane and 

sealing with elastic sealer. 

Side and end laps, Fittings including bolts, hook bolts, screws 

and washers, 

Sheets of any width or length. 

10.01 Supply and cast in place special plain concrete B200 for screed MS 395 

to roof with 1% slope, cast to falls not less than 4 cm thickness in 

the drain point, rate to include lining and hunching 10x10 cm with 

(45˚) to the edge of roof screed and parapet, rate also include 

smooth surface finish (Helicopter) to receive bitumen and all 

requirements as per specifications, drawings and Engineers 

instructions. 

10.02 Supply and apply waterproofing membrane (Novaglass) of MS 440 

bitumen rolls. (5 mm. thick. Density 180 g per m.s. of reinforced 

polyester sheets) covered with layer of crushed white stone with 

overlaps of not less than 10 cm. price to include primer coat, and 

all sheets flashing. For roof of main building and roofs of 

staircases and parapet grooves (See detail No.5/ A19). Or apply 

of two coats of acrylic white color paint from an approved 

company. 

10.03 Lean mix concrete to encase projected columns of roof. Price to 

include plastering, single layer torch applied polyester membrane, 

turn up and asphalt-base aluminum coating. 

LS 1 






(Bill - 11 ) ELECTRICAL WORKS 

11 a) Preamble: 

All electrical works shall be according to general and particular 

specifications, drawings, engineer’s approval, complete ready for 

work in place and in operable manner including chipping in walls, 

excavation, backfilling , cutting, fixing, cables ,conduits ,pipes , 

testing and handling over to JERUSALEM Electric Authority. The 

contractor should hold any test required according to supervisor 

engineers approval. 

11.01 Supply, install, fix, connect , commission ,label and test the 

following final distribution panel boards (Metal) including LV 

section, Legrand or equally approved circuit breakers, pipes and 

all components, ready for work according to drawings, 

specifications and engineer’s approval. 

11.01.1 DB-HALL No 1 

11.01.2 DB-KVAR (80KVA) complete ready for work. No 1 

11.02 Supply, install, connecting, commission and testing the following 

items including conduits, conduit accessories, boxes, wires, 

switches, cables, socket outlet devices and all what is necessary 

according to drawings, specifications and engineer’s approval. , 

Legrand or equally approved. 

11.02.1 Light point. No 175 

11.02.2 6A 3 pins with automatic shutter socket outlet. No 3 

11.02.3 16A 3 pins with automatic shutter power socket outlet fot th e No 2 

Split unit use, with double pole switch and sign lamp. 

11.02.4 6A 3 pins (WP) Twin socket outlet with automatic shutter. No 3 

11.02.5 16A 3 pins with automatic shutter Twin socket outlet No 18 

11.02.6 Ditto as item (e)but Modular flush mounted floor service outlet No 3 

box in the stage 

11.02.7 Hand Dryer point. No 2 

11.02.8 Double pole switch with indicating lamp. No 2 

11.02.9 Photocell activated Hand Dryer (2000W)-Venta. No 2 

11.02.10 Extract fan point. No 4 

11.03 Supply, install, connect ,commission and testing the following 

lighting fixtures including tubes, starters, capacitors, ballasts, 

bulbs, and all what is necessary according to drawings, 

specifications and engineer’s approval .GAASH or equally 

approved. 

11.03.1 4x18W fluorescent lighting fixture with double parabolic reflector- No 86 

false ceiling mounted. 

11.03.2 2x18W-PL (W.P) fixture with opal cover ceiling mounted. No 17 

11.03.3 2x8 W 3 hours duration non – maintained emergency lighting 

fixture. 

No 15 

11.03.4 As above but EXIT light. No 5 

11.03.5 Spot lights – Halogen (50W).in falser ceiling. No 20 

11.03.6 Wall mounted (60W globe) - WP. No 5 

11.03.7 Projection lights-100W on metal support complete. No 9 

11.03.8 Hexagonal lantern-60W wall mounted. No 6 

11.03.9 1*36W) Fluorescent lighting fixture with U reflector. No 6 





11.03.10 (2*36W) Fluorescent lighting fixture with U reflector No 7 

11.04 Telephone LV System:- 

Supply, install, connecting, testing the following items including 

conduits, boxes, wires,CAT6-cables ,batch panels…etc. and all 

what is necessary ready for work according to drawings, 

specifications and engineer's approval .. 

11.04.1 Telephone socket outlet Legrand or equally approved. No 8 

11.04.2 Telephone Terminal boxes 10 pair T.T. block size capacity. No 1 

11.04.3 Modular flush mounted compartment floor service box contains No 1 

the following; 

- Microphone socket outlet 

- Telephone Socket Outlet 

- Computer Socket Outlet 

11.04.4 Main Telephone riser cable ten (10) pairs. LM 100 

11.04.5 Intercom Hand set compete (AIPHONE or equally approved). No 3 

11.04.6 Intercom Main station (AIPHONE or equally approved). No 1 

11.04.7 Loud speaker point. No 4 

11.04.8 Circular Loud speaker in false ceiling (6/9W-BOSCH). No 8 

11.04.9 Microphone socket outlet. No 9 

11.05 Computer Switch Panel: 

a)Supply install, connect, commission and test data panel (U12) 

including switch (CISCO, 3COM, HP) or equally approved, 1 

Patch Panel, ventilation fan with all needed internal cables, 

connection and all accessories complete ready for work in place 

and operable manner according to drawings specifications and 

engineers approval. (All switches 1GB). 

No 1 

11.06 Computer System: 

Supply install, connect and test CAT6 computer outlets (data 

points) including outlets, CAT6 cables, boxes, conduits, and all 

what is necessary compete ready for work in place and in 

operable manner according to drawings specifications and 

engineer's approval. 

a) Computer socket outlet, cables and terminals (CAT6-3M) No. 12 

11.07 Intelligent Fire Alarm System: 

Supply install, connect, commission and test Addressable fire 

alarm system EDWARDS, Morley, Notifire or equally approved 

compete ready for work in place and operable manner. With all 

accessories according to drawings specifications and engineers 

approval. 

11.07.1 Main fire alarm panel -Two loops. No 1 

11.07.2 Photo Electric Smoke detector No 20 

11.07.3 Break Glass push button. No 5 

11.07.4 Internal siren with flasher. No 3 

11.07.5 External siren with flasher. No 3 

11.08 TV System: 

Supply, install, connecting and testing the following items 

including conduits, boxes, wires, cables, splitters and all what is 

necessary according to drawings, specifications and engineer’s 

approval: 

TV socket outlet Legrand or equally approved. No 1 

11.08.1 10x10x10 cm TV box. No 1 

11.08.2 Satellite socket outlet. No 1 

11.08.3 Digital Satellite Dish 1.7 m fixed type suitable for three Sat 

(Arabsat, Nilesat, Hotbird) with (LNBs). 

No 1 





11.09 Supply, install , connect ,commission and test the following 

Cables including conduits ,pipes, earth wires, trench, manholes 

and all what is necessary, according to drawings, specifications 

and engineer’s approval : 

11.09.1 XLPE (3x95+50) mm 2 LM 100 

11.09.2 XLPE (3x70+35) mm 2. LM 50 

11.09.3 XLPE (5*2.5 mm 2 .control cables. LM 100 

11.10 Earthing System: 

Supply install, connect, commission and testing earthing system 

including conduits, wires, earthing pits, testing manholes, clamps, 

soldering, welding and all accessories complete ready for work 

according to drawings, specifications and engineers approval. 

11.10.1 Foundation earthing system by welding (3x30 mm) galvanized 

steel strip to have one Ohm earthing resistance. 

11.10.2 Main water pipe line earthing S.C. Tined exposed copper wires 

(50mm2). 

LS 1 

LS 1 

11.10.3 Main earthing Bus Bar box. LS 1 

11.10.4 One OHM earthing system using (1.5m) DIA 19mm Cu. Earthing LS 1 

rods planted in pits in compact soil fill. 

11.10.5 Earthing inspection box. No 2 

TOTAL CARRIED TO NEXT PAGE 





(Bill - 12 ) PLUMBING, SANITARY AND MECHANICAL 

12 Preamble: 

All Mechanical work items mentioned hereinafter for all project 

facilities and units shall include supply, delivery, installation, 

adjustment, testing commissioning, and all required materials, 

equipment and workmanship to execute the items of construction 

in accordance with the specifications, drawings and supervising 

engineer’s instructions, complete in place and ready for handing 

over. Measurements and payments shall be described in the 

relevant documents. Radiator section, sanitary fixture and water 

distribution cabinet. Price must include supply and install cross 

linked polyethylene pexgol (Golan) 16 mm and 20 mm pipes. 

Prices must include working drawings for all mechanical works 

that should be submitted by the contractor and to be approved by 

the supervisor engineer before starting works. Also price includes 

as built drawings for all works. 

12.01 Wash Basins & Lavatories: 

Supply and install White Ideals standard wall mounted wash 

basin model Ecco of size 50*35cm of No.V2001 or equivalent 

complete with Ideal standard mono block. Chrome plated lever 

mixer chrome plated angle valve of size 0.5”x3/8” type Neil No. 

300224, supports screw, 13 mm chrome plated hose, supports, 

Ø2” waste outlet, down to floor drain, plastic P-trap 11/4” type 

Holliot and accessories such as liquid soap dispenser, and st. 

steel Fram mirror size 50x90 cm. 

a) Wash Basin with mirror shelves and hand paper Towels No 2 

holder. 

b) Wash Basin with electrical hand dries. No 4 

12.02 Water Closets: 

S & I Porcelain wall hung W.C white color size 530x360 No 6 

European type SANREMO (IS) P-trap model R3401 or E.A. The 

rate shall include for the following: 

- Concealed steel support frame type (IS) model R6500.67. 

- Seat with cover including stainless steel hinges type (IS) model 

R3902. 

- Push button 6Lt silent flush valve type ZURN Z-6145. 

- Concealed stainless steel gage 12 service box and cover size 

30x30x15 cm for flush valve maintenance. 

- Stainless steel Paper holder type BOBRIC model B-6699 or E.A 

for single roll fixed to wall. 

12.03 Shower: 

Supply and install white glazed clay shower tray of size 80*80cm, 

of approved manufacture ideal standard. 

-San Remo or equivalent completed with ideal standard wall 

mounted hot and cold chrome plated mixture, adjustable shower 

head stainless steel grating strainer ‘11/4’ VPVC trap completed 

with all necessary pipes and fitting for connecting water mixer to 

hot and cold water collectors, trap to floor drain and Towel hooks. 

No 2 





12.04 Floor Drains: 

Supply and install 4” PVC P–Trap type Holliut for floor drain 

including copper chrome plated 15x15 cm with one closed cover 

and one grating cover with connection to 4” UPVC pipe, 2” and 

11/2” P.V.C. drain pipe of different sanitary fixture competed with 

rubber joints, Branch open box, record and mastic seal. 

a) Floor Trap size 4/4”. No 4 

b) Floor Drain size 4/2”. No 2 

12.05 Cleanouts: 

Supply and install UPVC clean out opening as shown on the 

drawings competed with PVC elbow, copper chrome plated 15x15 

cm with closed removable cover, concrete and mastic seal. 

a) Size 4” UPVC pipe. No 4 

12.06 Roof Drains: 

Supply and install UPVC rain water roof drain including 4” P.V.C. No 8 

elbow type Radi connection to rain water drain Gal. steel 3” pipe 

with 20x20 cm copper chrome plated flate cover, special 

galvanized sheet metal plate and pipe and all necessary fitting 

needed as shown in drawings and approved of supervisor 

engineer. 

12.07 Drainage Pipes: 

Supply and install UPVC type U.A.P – Plaste (Taken) SN4 vent 

and drainage pipes to floor drains or down to manholes with all 

required Holliot red color–Taken fittings such as elbow, T, Socket 

rupper seal…etc. including excavation, back filling, incasing with 

concrete and roof vent caps, including connections as shown in 

drawings and in accordance to specifications. 

a) Size 4 inch diameter UAP – Plast (SN4). MR 35 

12.08 Rain Water pipes: - 

Supply and install light Galvanized steel pipe of thickness 1.5mm 

for drain rain water drain pipes down to the site levels with wired 

mesh above ground level, with all required fittings such as elbow, 

T, socket and vent caps, pipe connected together by are-welding 

all as shown in drawings, specifications, and approval of 

supervisor engineer. 

a) Ditto but 4” UPVC Pipe for drain water drain. MR 48 

b) Ditto but of pipe size 2” diameter. MR 10 

12.09 External Drainage and Rain Drain Pipes: 

Supply and install UPVC–SN8 U.A.P.–Plast (Taken) drainage 

pipes with all fittings type holliot red color such as T, reducer, 

elbow, socket rupper seal…etc including connections, 

excavation, covering with a layer of 20 cm sand around the pipe, 

and back filling for underground pipe as shown in drawings and 


a) Size 6 inch diameter. MR 53 

12.10 Sewer Manholes: 

Supply and install readymade reinforced concrete manholes of 15 

cm thickness for walls, Top and bottom slab with all necessary 

excavation, blinding of 10 cm thickness, back filling as specified 

to the required depth complete with cast iron steps, benching, 

drop pipe and plastering as shown in drawing and in accordance 

to specification, drawings, and approval of supervisor engineer. 

a) Manhole internal size Ø 60 cm with medium duty C.I (8 No 4 

ton) cover depth max. 90 cm. 

b) Ditto but size Ø 80 depth max. 120 cm. No 2 





12.11 Water Distribution Cabinet: - 

Supply and install steel manufacturer made water distribution 

cabinet with double doors of approved manufacture as per 

Giacomini or equivalent with all necessary GiACOMINI or 

equivalent Manifolds for hot and cold water, with all necessary 

Giacomini compression fittings such as plastic connection boxes, 

main values, branch values Air vent, drain valve, 16 mm pipe 

from collector to sanitary fixture and any other necessary parts, 

materials or fittings, rate to include any civil works needed to 

complete the required installation. Cabinet with following 

collector. 

a) 3/4” C.W. / ¾ H.W. No 2 

b) 1’’ - C.W – ¾” H.W. No 1 

12.12 Cold Water Supply Pipes: 

Supply and install galvanized steel pipe seamless schedule 40 

inside mechanical shaft, roof and parking for domestic cold water 

from street water connection to water distribution cabinet 

including all required asphalted protection insulation and sleeves 

for underground, Crane gate valves, ball valve Giacomini, York 

check valves, strainers, rubber expansion joint, automatic air 

vents callefy, drain ball valve with all required Ardan (Taken) 

Galvanized fittings and connections. All is according to drawings, 

specifications, and approval of supervisor engineer. 

a) Size ¾ inch diameter. MR 70 

b) Ditto of size ¾” for Hot Water supply with 13 mm insulated MR 65 

tube wrapped by 10 cm wide foil aluminum sheet. 

c) Size 1 inch diameter. MR 65 

d) Size 11/2 inch diameter. MR 4 

12.13 Water Tank: 

Supply and install on roof polyethylene water tank of approval No 4 

local type as ARASTED or equal of capacity 1500liter. Price 

include tank, metal base constrated of painted, anyle steel 

40x40x4mm, Ø ¾’ water flauter, cheain open Ø¾’, Ø1’ feed pipe 

with value and air tile plastic cover. 

12.14 Fire Extinguisher: - 

Supply and install portable fires extinguishers type LAHAVOT of 

the rechargeable type and shall be supplied complete with the 

operating charge from the factory. The brackets shall be 

specifically supplied for the extinguisher type and size concerned. 

Dry fire extinguishers shall be of the CO2 type with a rugged all 

brass operating valve, large size operating lever, full vision 

pressure gauge, discharge hose and heavy duty drawn steel 

cylinder with hard scratch resistant finish. Capacity of 6 kg. 

No 13 





12.15 Solar Heating System: 

Supply, install and commissioning of solar heating system consist No 1 

of: 

1. Two three heating panel of size (1.9x0.9) cm installed by 

polyethylene. 

2. One hot water storage tank of capacity 200 liter with epoxy 

paint inside and polyethylene insulation outside. 

3. Electric heater element of 3 Kw. 

4. 1.5 Cu.M Plastic Water Tank. 

5. 2 meter height metal base painted with primary coating and 

with final black paint. 

Price includes all necessary piping, fitting for connection to pipe 

network on roof and all electrical works necessary as shown in 

drawings. 

12.16 Duct Insulation: 

Supply and install fiber glass insulation and all required materials 

according to specifications and to approval of supervisor 

engineer. 

a) For duct work above false ceiling. Sqm 280 

b) Ditto but inside duct work (acoustic fiber glass). Exposed Sqm 195 

duct with cladding. 

12.17 Air Outlets (SUPPLY AND RETURN) 

Supply and install air outlets of approved manufacturer such as 

metal press and to be checked for throw, drop and noise level 

less than 40 dBA with capacities as indicated on the drawings. All 

air outlets shall be constructed from extruded aluminum sections 

and shall have a powder coated finish; colour of finish shall be to 

the approval of the architect. 

a) Supply square ceiling diffusion 15”x15” with damper. No 24 

b) Return square ceiling grill 15”x15”. No 30 

c) Return Grill 50”x38”. No 2 

12.18 Exhaust Fan: 

Supply and install window type exhaust fans of approved 

manufacture such as “Vortice” or equivalent complete with selfact 

automatic shutter. Price includes making necessary holes in, 

fixing and electrical connection. All is according to drawings, 

specifications and approval of supervisor engineer. 

a) Capacity 80 CFM. No 2 

b) Capacity 150 CFM. No 2 

c) Capacity 300CFM. No 1 





12.19 Provesional Item 

Supply and install package roof top air conditioning heat pump 

unit of approved manufacture such as Carrier, Daikin or equal of 

rated and location as shown in drawing. These packages unit are 

designs for outdoor installation at ambient temp 45c and they 

used for cooling and heat pump application. The unit should be 

low sound power level by using low noise hermetic scroll 

compressors and fans. The unit should be good finishing all 

exposed piping including coil header are epoxy coated, all coil v- 

bends are protected with a galvanized steel painted cover plate 

and all suction lines are covered with rubber insulation wrapped 

in cheese clothes and epoxy painted. 

No 1 

Unit completed with all main parts and all accessories including 

hermetic scroll compressor mounting on vibration isolators and 

acoustic sound protection, evaporator and condenser coil 

manufactured from seamless copper tube mechanically 

expanded in aluminum fins, direct drive evaporator fans, filters, 

drain pan, damper are made of rigid aluminum blades, unit 

include exhaust and fresh air damper should be linked for 

motorized operation, refrigerant type used R407-C and each 

refrigeration circuit include thermostatic expansion valve, liquid 

line shut off and solenoid valve, high/low safety pressure 

switches dryer. The unit must be supply by all optioned feature. 

The heat pump unit should be include remote heat/ cool switches, 

reserve, valve and defrost cycle control. Price include also all 

electrical work with supply and install all accessories such as 

main cables, wiring, SB, Electrical board. Room thermostat, 

microprocessor controller with economizer operation, motor 

actuator for fresh, return and exhaust air damper. Unit mounted 

on special reinforced concrete base with spring vibration 

absorber. 

HALL unit of cooling capacity 178 KW. 

Heating load capacity 120 Kw. 

Air flow volume 16800CFM. 

12.2 Wall split Heat Pump A/C Unit (Provisional): 

Supply and install wall high level type split heat pump A/C unit of 

capacity as shown in drawing of approved type such as Carrier, 

Daikin, or equivalent. The unit consists of outside part install on 

wall on steel base, indoor part fancoil hanged on wall at high 

level. The connection between two parts done by insulated 

copper pipe, electrical cable and control wiring. Price completed 

by remote control, supply and install 11/4" HDPE condensate 

drain pipe to be connected with the nearest F.T. The unit 

operated by remote control. Price includes all civil work, electrical 

work and electric heating element. 

cooling capacity 6kw 

No 2 

12.21 Supply, install 3 kg FM200 Gas Fire Extinguisher in Electrical 

Room according to JE Com. Regulations. The price includes all 

accessories and fitting needed for installation and fixation. 

Job 1 






PART 2: Terra Santa Kindergarten (basement floor) BOQ 

(Bill - 01 ) MASONARY & PLASTERING WALLS 

Masonry: 

Hollow concrete block work the price includes cement mortar R. 

C. lintels (B250), wall ties and accessories in accordance with 

specification and drawings. Also includes painting the first coarse 

with Latex Bitiminus Emulsion 

a) 10cm thick wall for partitions. M2 42 

b) 20cm thick wall. M2 67 

PLASTERING 

PREAMBLE. 

PLASTERING to all areas shall be measured net, including 

openings, which are less than 0.25 Meter Sq. The price shall 

include for running rules, all narrow widths, for taking out joints on 

block walls or backing concrete face for key, for making good to 

frames around pipes and other fittings, plastering to jambs and 

reveals of openings, side of columns, window sills; all of which 

shall be measured as plastering. 

Price shall also include Expanded metal lath, angle beads at all 

appeared corners for the entire height, and plaster stops at 

opening edges, expansion joints, sills, labor, curing, erecting and 

dismantling of scaffoldings, additives, pigments and all incidentals 

required as specified and / or detailed on the Drawings. 

1.01 Internal Plastering. 

20mm thick, three coat plaster including all necessary angle, 

beads and expanded metal (wire mesh) strips at joints of different 

background and along all electrical and mechanical installations 

in accordance with specification. 

a) For ceiling. M2 250 

b) For internal walls. M2 360 






(Bill - 02 ) TILING, FLOORING AND MARBLE WORKS 

PREAMBLE. 

1. All tilling works (terrazzo, ceramics and marble) shall be 

measured net in square meters. Deducting all opening and voids 

more than 0.25 M.S. 

2. Marble works for steps and treads of stairs shall be 

measured in linear meter. The tread, the riser, flight skirting and 

water stop shall be measured as a single unit. 

3. Marble works for window sills and other openings shall be 

measured in squared meter. 

4. Marble works for urinals shall be measured in number. 

5. Parapet copping shall be measured in squared meter. 

6. Rate shall include preparation of surfaces under tiles, Finnish 

to falls and cross falls, special tile peace’s for edges and the like, 

tile surface finishing, Plastic spacers. Pointing and cleaning and 

all incidental as per specifications. 

7. Rates shall include also providing and mounting in place 

“School Title Marble Plate” of white clear local marble polished, 

finished and engraved in the design provided by MOE. 

2.01 Terrazzo Tiling: 

Supply, Install and finish Pre-cast Terrazzo Tiles size (30x30x3) 

cm, with Italian marble chipping # 6. 

Price to include terrazzo skirting size (30x7x1) cm from the same 

type and color of tiles, Price also to include bedding and jointing 

in cement and sand mortar, pointing with white cement, required 

sand fill, and on site grinding, polishing and cleaning. 

2.02 Supply and Install White Porcelain Glazed Wall Tiles, First choice 

and free from all defects. (Spanish made or equivalent). 

Price to include round edges tiles perimeters, cutting, patching 

around the services bedding in cement mortar, grouting, pointing 

with white cement and two coats of plaster. All works shall be in 

accordance with drawings and specifications. Engineer shall 

approve size and color of tiles which should be not less than 

(20x20x0.6) cm. 

MS 230 

MS 92 

2.03 Local approved colored marble best quality fixed with cement 

and sand mortar, polished finish including grouting, curved 

edges, sealant and additives. 

a) 50 mm. thick polished local marble for window sills. MS 3 

b) 30 mm. thick polished for door thresholds MS 5 






(Bill - 03 ) PAINTING WORKS 

PREAMBLE: 

Painting and decorating to walls, ceilings and the like shall be 

measured net in meter square. 

Painting to other works shall be included in the related items. 

Paints shall be supplied to site in sealed container, as approved 

by the Engineer, and site mixing shall not be permitted. 

The Contractor rates shall include for supply of all materials, 

workmanship, samples, primers, surface preparation, protection 

of painted surfaces, application to all heights as required of 

works, repair of all damaged surface at the contractor’s 

expenses, and all other requirements as stated in the 

Specifications. 

3.01 Painting: 

Acrylic emulsion paint to cement plaster in accordance with 

specifications for walls (prepare surface, one prime coat and two 

coat of emulsion coat). 

M2 360 

3.02 Policid paint to cement plaster in accordance with specification 

for ceiling (prepare surface, one prime coat and two coat of 

Policid paint). 

M2 230 






(Bill - 04 ) CARPENTRY AND JOINERY WORKS 

PREAMBLE. 

Sizes of carpentry works given in the Bills of Quantities are finished sizes 

and shall be as per Drawings. 

Sizes of doors and other items mentioned in the Bills of Quantities shall 

allow for tolerance to suit the structural openings shown in the Drawings. 

· Wooden doors and pair of doors shall be measured in number for each 

structural opening, unless stated otherwise in the Bills of Quantities. 

· Blackboards shall be measured in number or in squared meters as 

mentioned in the Bills of Quantities. 

· Wall protection wooden rubbing rails shall be measured in linear meter. 

· Cloth hangers and hanger wooden base shall be measured in number 

or in linear meter as stated in the Bills of Quantities. 

Rates for carpentry and joinery work shall include: 

a) Shop and coordinated drawings. 

b) Frames, architrave, chalk holders and other holders and 20 cm. high 

“U” shape kick plates. 

c) Allowance for plastering and tiling and the like. 

d) Cutting and fitting around obstructions, Bedding and painting. 

e) Grounds, blocking and backings. 

f) Plugging concrete, block work, and stone work, and making well. 

g) Ironmongery including cylindrical locks, handles, stoppers, screws, 

temporary fixing, re-fixing, oiling and adjusting. 

h) Providing three keys for each lock including tagging. 

i) Providing and fixing wall mounted wooden keys cabinet, (70x70x10) 

cm. varnish finished with all ironmongery including cylindrical lock. 

j) Providing and fixing Room Title Plate, Painted Steel (30x20) cm. 

mounted on wooden plate (35x25) with varnish finish. 

k) Steel legs, brackets, bearers and other supports including painting. 

l) Glass and glazing including cutting to size and putty. 

m) Fly screening including cutting to size. 

n) Preparing surfaces to receive finishes. 

o) Painting, varnishing, polishing, oiling, and the like, to any area or width 

in any location including work in multicolor and cutting in edges and 

putty. 

4.01 Wooden Doors: 

Supply and install 4.5 cm thick wooden door with hard wood frame. 

Plywood veneer 5mm thick, including ironmongery , glass, cylinder lock 

Union,domicile or equivalent type , kick plates, door Stopper, painting, 

prime coat two putty coats, under coat and two oil-paint in accordance 

the specifications. 

a) Wooden doors type D1 as per drawings. No 4 

b) Wooden doors type D2 as per drawings. No 2 

c) Wooden doors type D3 as per drawings. No 2 

d) Wooden doors type D4 as per drawings. No 5 

4.02 Chalkboard 

Supply and install a chalkboard size 400x127cm 16mm thick No 2 

plywood the price include a frame of hardwood around 

chalkboard + magnetic panel with a chalk shelf including a 

magnetic panel overall size 100cm long x 110cm high of 3mm 

steel sheet magnetic display and paint of prime coat and two 

putty coats and 3 coats of special oil paint for chalk board as per 

drawing. 

4.03 Supply and install wooden belt (200x20mm) of hard Swedish 

wood. The price should include paint of prime coat and two 

varnish coats as shown in the detail drawings. 

LM 55 






(Bill - 05 ) METAL AND ALUMINUM WORKS 

PREAMBLE: 

Metal works shall be measured in number. 

Rates for metalwork shall include for: 

Preparing shop drawings, 

Drilling, counter sinking, screwing, bolting and riveting. 

Subframes, including galvanized steel frames for Aluminum 

windows and architrave. 

Lugs, plugs, holdfasts and the like. 

Gaskets, sashes, double weather strips and external and internal 

silicon filling around frames. 

Ironmongery including cylindrical locks (Union or equal), stoppers, 

handles, temporarily fixing, refixing, oiling and adjusting. 

Providing three keys for each lock and padlock including tagging. 

Hardware including cramps, dowels and the like. 

Glass and glazing including cutting to size, putty and rubber. 

Preparing surfaces for painting one coat of primer before fixing. 

Sealing and Painting to any area or width in any location including 

work in multicolor and cutting in edges. 

All other accessories and incidentals required to execute the 

work. 

5.01 Aluminum Works: 

Supply and install aluminum windows local made section 700 and 

400 or equivalent as per drawings with 4mm clear float glass 

including frames, sub-frames, fly screen gaskets, fixing 

accessories, sealant ironmongery and weather strip in 

accordance with specifications. 

Aluminum window types (W1,W2,W3,D5). M2 25 

5.02 Steel Protection for Windows: 

Supply and install galvanized wire steel mesh for windows the 

price includes prime coat under coat and two coats of oil paint 

according the drawings and specifications. 

M2 14 






(Bill - 06 ) ELECTRICAL WORKS 

6 a) Preamble: 

b) All electrical works shall be according to general and 

particular specifications, drawings, engineer’s approval, complete 

ready for work including chipping in walls, excavation, and 

backfilling, cutting, fixing, testing and handling over to local 

electric authority. The contractor should hold any test required 

according to supervisor engineers approval. All works include 

cables, conduits and pipes.. 

6.01 Supply, install, fixing, connecting and testing the following final 

distribution panel boards (Metal) including LV section, Legrand 

circuit breakers or equal approved, pipes and all components, 

ready for work according to drawings, specifications and 

engineer’s approval. 

6.01.1 DB-BASMENT (WP-WITH LOCK). No 1 

6.02 Supply, install, connecting, and testing the following items 

including conduits, conduit accessories, boxes, wires, switches, 

socket outlet devices and all what is necessary according to 

drawings, specifications and engineer’s approval Legrand or 

equivalent. 

6.02.1 Light point.(complete). No 40 

6.02.2 16A 3PIN power socket outlet with automatic shutter. No 10 

6.02.3 16A 3PIN power socket outlet with isolating switch and indicating No 3 

lamp.(A/C) use. 

6.02.4 16A 3Phase power socket outlet with isolating switch and No 1 

indicating lamp.(A/C) use 

6.02.5 Extract fan point. No 2 

6.02.6 TV socket outlet with 75 OHM cables. No 3 

6.02.7 Telephone socket outlet with cables. No 1 

6.03 Supply, install, connecting, testing and commission the following 

lighting fixtures including tubes, starters, capacitors, ballasts, 

bulbs, and all what is necessary according to drawings, 

specifications and engineer’s approval GAASH or equivalent. 

6.03.1 2*36W-fluorecent lighting fixture with U reflector. No 18 

6.03.2 2x18W-PL (W.P) fixture with opal cover ceiling mounted GAASH. No 12 

6.03.3 Wall mounted globe (60 W). No 2 

6.03.4 1*36W-Blackboard fitting with arms and half reflector. No 4 

6.03.5 2X8W 3 hours duration non maintained emergency lighting No 4 

fixture. 

6.03.6 Electric fan point-100W. No 3 

6.03.7 Electric fan with variable speed transformer switch. No 3 

6.04 Supply install and connect the following cables including conduits 

trench, metal trunks and cover, manholes, earth wire sand all 

what is necessary complete ready for work to engineer’s 

approval. 

6.04.1 a)XLPE (5*6MM2) cable. LM 30 

6.04.2 b)XLPE(5*10MM2) cable. LM 20 






(Bill - 07 ) MECHANICAL WORKS 

7 Preamble: 

All Mechanical work items mentioned hereinafter for all project 

facilities and units shall include supply, delivery, installation, 

adjustment, testing commissioning, and all required materials, 

equipment and workmanship to execute the items of construction 

in accordance with the specifications, drawings, and supervising 

engineers instructions, complete in place and ready for handing 

over. Any shortage of items, quantities, materials, equipments, 

drawings and specifications should be notified to the owner by 

the contractor before submitting his officer, otherwise mechanical 

works will be executed completely inspite of any shortage. 

Measurements and payments shall be described in the relevant 

documents. Prices must include working drawings for all 

mechanical works that should be submitted by the contractor and 

to be approved by the supervisor engineer before starting works. 

Also price includes as built drawings for all works. 

7.01 Wash Basins & Lavatories: 

Supply and install white vitreous china such as Roca( vectoria) or No 4 

equivalent wall mounted wash basin size 52*40 mm complete 

with Hamat (or Equivalent) Chrome plated long neck wall tape, 

supports, Æ 2” waste outlet, down to floor drain, chrome plated P- 

trap, mirror size 600x400 mm with stainless steel frame and 

accessories such as liquid soap dispenser. 

7.02 Water Closets: 

Supply and install white vitreous china Roca (vectoria) or 

equivalent water closets complete with 9-lt. capacity cistern, 

valves, fittings, solid and heavy seat cover, toilet roll paper holder 

chrome plated 13mm stop angle valve, chrome plated 13mm 

hose and accessories, 13mm chrome plated hose of 1m length 

with hand spray, and to be connected with water cabinet. All is 

according to drawings, specifications and approval of supervisor 

engineer 

No 5 

7.03 Floor Drains: 

Supply and install floor drain including 15×15 cm stainless steel 

cover and main drain connections as located on drawings. 

a) Floor drain size 4”/4” diameter. No 3 

7.04 Cleanouts: 

Supply and install UPVC floor clean-outs with stainless steel 

screwed specially for C.O. cover of 20×20 cm. 

a) Size 4”. 

No 2 





7.05 Drainage Pipes: 

Supply and install UPVC vent and drainage pipes to floor drains 

or down to manholes with all required fittings including 

excavation, back filling, incasing with concrete and roof vent 

caps, including connections as shown in drawings and in 

accordance to specifications. 

a) Size 1 1/2 inch diameter (For condensation). MR 34 

b) Size 4 inch diameter. MR 16 

c) size 6’’ inch diameter MR 14 

7.06 Water Distribution Pipes: - 

Supply and install cross-linked polyethylene pipes (cross-linking 

factor >75%) with a working temperature 95c° at 10 bar and 20c° 

bar (PN 20). These pipes should be specialized for domestic 

water supply with approvals for hot and cold water installations 

like NSF (USA) KIWA (Netherlands) WRC (Britain). DVGW 

(Germany). These pipes should also have approvals for hygienic 

toxicological approvals. These pipes should be totally smooth 

from the inside. Rate to include testing and commissioning and all 

necessary parts, sleeves, materials or fitting to join the pipes form 

distribution cabinets to all consumption points as shown in 

drawing: 

a) 16 mm diameter pipes, 25 mm sleeve. MR 55 

7.07 Water Distribution Cabinet: - 

Supply and install metal distribution cabinet with double doors 

(thermal painting) of 1.5mm type ELEMCO thickness with all 

necessary GIACOMINI manifolds, compression fittings plastic 

connection boxes, main valves, branch valves and any other 

necessary parts, materials or fittings, rate to include any civil 

works needed to complete the required installation 

7.08 Cold Water Supply Pipes: 

Supply and install galvanized steel pipe schedule 40 or 

equivalent for domestic cold water from water, roof tanks to water 

distribution cabinet, including all required insulation by vedoflex of 

6mm thickness rolled by plastic bonds, and sleeves, gate valves, 

check valves, strainers, rubber, automatic air vents, drain cocks 

with all required fittings and connections. All is according to 

drawings, specifications, and approval of supervisor engineer. 

a) Size 1” inch diameter MR 15 





7.09 Fire Extinguisher: - 

Supply and install portable fire extinguishers of the rechargeable 

type and shall be supplied complete with the operating charge 

from the factory. The brackets shall be specifically supplied for 

the extinguisher type and size concerned. Dry chemical fire 

extinguishers shall be of the ABC type with a rugged all brass 

operating valve, large size operating lever, full vision pressure 

gauge, discharge hose and heavy duty drawn steel cylinder with 

hard scratch resistant finish. Capacity of 6 kg. 

No 6 

7.1 Exhaust Fan: 

Supply and install windows or wall type exhaust fans of approved 

manufacture such as “Vortic” or Venta or equivalent complete 

with self-act automatic shutter. Price includes making necessary 

holes in glass and fixing. All is according to drawings, 

specifications and approval of supervisor engineer. 

a) Capacity 170 CFM. No 2 

b) Capacity 450 CFM. No 5 

7.11 Submersible pump: 

Supply and install submersible pump set for waste water 

discharge of approved type such as Grandfus or approved equal 

of capacity 10 Cu.M/H and head 10 meter. The price completed 

with all necessary fitting and material such as Ǿ2’’HDPE 

discharge pipe from pump to nearest sewage manhole as shown 

in drawings, fixing pump in collection pit, automatic floater, power 

supply and electrical control board 

set 1 

7.12 Wall Split Heat Pump A/C Unit (Provisional): 

Supply and install wall high level type split heat pump A/C unit of 

capacity as shown in drawing of approved type such as Carrier, 

Trane and Petra. The unit consist of outside part install on wall on 

steel base, indoor part fancoil hanged on wall at high level. The 

connection between two parts done by insulated copper pipe, 

electrical cable and control wiring. Price completed by remote 

control, supply and install 11/4” HDPE condensate drain pipe. 

The unit operated by remote control. Price includes all civil work, 

electrical work and electric heating element. 

a)Cooling Capacity 4.5 kw. No 1 

b)Cooling Load 6.5 kw. No 2 

c)cooling load 10kw No 1 



Item 

Bill 1 













Summary of Part 1- Construction of Multi-Purpose Hall 

Description 

EXCAVATION AND BACKFILLING 

CONCRETE WORKS 

STONE WORKS 

CONCRETE BLOCK WORKS 

PLASTERING WORKS 


CARPENTRY AND JOINERY WORKS 

STEEL AND ALUMINUM WORKS 

PAINTING AND DECORATION WORKS 

NSULATION, ROOFING AND EXPANSION JOINTS 

ELECTRICAL WORKS 

MECHANICAL WORKS 

Total 

Grand Total 

Discount 

Discount Amount 

Net Grand Total EXCLUDING V.A.T ( PART 1) 

NET GRAND TOTAL (in words ) : 

SIGNED AND SEALED : 

AUTHOURIZED : 

TITLE : 

SIGNATURE : 

DATE :

Item 









Summary of Part 2- Finishing the Basement at the Kindergarten 

Description 

MASONARY & PLASTERING WALLS 


PAINTING WORKS 

CARPENTRY AND JOINERY WORKS 

METAL AND ALUMINUM WORKS 

ELECTRICAL WORKS 

MECHANICAL WORKS 

Total 

Grand Total 

Discount 


Net Grand Total EXCLUDING V.A.T ( PART 2) 



AUTHOURIZED : 

TITLE : 

SIGNATURE : 

DATE :


Over-all Summary ( Part 1+ Part2) 

Item 

Part 1 

Description 

Construction of Multi-Purpose Hall 

Total 

Part 2 

Finishing the Basement at the Kindergarten 

Grand Total 

Discount 


Net Grand Total EXCLUDING V.A.T ( PART 1+Part 2) 



AUTHOURIZED : 

TITLE : 

SIGNATURE : 

DATE :

Bill of Quantities - UNDP

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?