Bill of Quantities - UNDP

ATLAS # 43734 - Terra Santa School
Construction of Multi-Purpose Hall and finishing works at the Basement in the Terra Santa Kindergarten
Item# Description Unit Qty. Rate Amount
(Bill - 11 ) ELECTRICAL WORKS
11 a) Preamble:
All electrical works shall be according to general and particular
specifications, drawings, engineer’s approval, complete ready for
work in place and in operable manner including chipping in walls,
excavation, backfilling , cutting, fixing, cables ,conduits ,pipes ,
testing and handling over to JERUSALEM Electric Authority. The
contractor should hold any test required according to supervisor
engineers approval.
11.01 Supply, install, fix, connect , commission ,label and test the
following final distribution panel boards (Metal) including LV
section, Legrand or equally approved circuit breakers, pipes and
all components, ready for work according to drawings,
specifications and engineer’s approval.
11.01.1 DB-HALL No 1
11.01.2 DB-KVAR (80KVA) complete ready for work. No 1
11.02 Supply, install, connecting, commission and testing the following
items including conduits, conduit accessories, boxes, wires,
switches, cables, socket outlet devices and all what is necessary
according to drawings, specifications and engineer’s approval. ,
Legrand or equally approved.
11.02.1 Light point. No 175
11.02.2 6A 3 pins with automatic shutter socket outlet. No 3
11.02.3 16A 3 pins with automatic shutter power socket outlet fot th e No 2
Split unit use, with double pole switch and sign lamp.
11.02.4 6A 3 pins (WP) Twin socket outlet with automatic shutter. No 3
11.02.5 16A 3 pins with automatic shutter Twin socket outlet No 18
11.02.6 Ditto as item (e)but Modular flush mounted floor service outlet No 3
box in the stage
11.02.7 Hand Dryer point. No 2
11.02.8 Double pole switch with indicating lamp. No 2
11.02.9 Photocell activated Hand Dryer (2000W)-Venta. No 2
11.02.10 Extract fan point. No 4
11.03 Supply, install, connect ,commission and testing the following
lighting fixtures including tubes, starters, capacitors, ballasts,
bulbs, and all what is necessary according to drawings,
specifications and engineer’s approval .GAASH or equally
approved.
11.03.1 4x18W fluorescent lighting fixture with double parabolic reflector- No 86
false ceiling mounted.
11.03.2 2x18W-PL (W.P) fixture with opal cover ceiling mounted. No 17
11.03.3 2x8 W 3 hours duration non – maintained emergency lighting
fixture.
No 15
11.03.4 As above but EXIT light. No 5
11.03.5 Spot lights – Halogen (50W).in falser ceiling. No 20
11.03.6 Wall mounted (60W globe) - WP. No 5
11.03.7 Projection lights-100W on metal support complete. No 9
11.03.8 Hexagonal lantern-60W wall mounted. No 6
11.03.9 1*36W) Fluorescent lighting fixture with U reflector. No 6
Consultant: Diyar Consultants Co. Engeering Unit @ UNDP/PAPP 15/31