Nexsys Modules - Crest Audio

More documents

Recommendations

Info

5 p.20 Operation STO Daisy Chaining Any number of CKi amplifiers can be daisy-chained together for sequential turn-on.Wiring two amplifiers for STO is as simple as connecting the “On,” “Com” and “Off” pins of the “STO Out” connector on the first amplifier to the corresponding pins on the “STO In” connector on the second amplifier. Repeating this wiring scheme with subsequent amplifiers allows entire systems of CKi’s to be wired for STO. <strong>Modules</strong> CKi amplifiers come standard with a blank panel fixed over the module bay. When a NexSys module is installed in this bay, connection to a network is made via a standard RJ-45 connector and CAT-5 Ethernet cable. Module Removal/Installation The amplifier must be switched off and unplugged from the AC mains supply before any module operation is undertaken. Two Phillips head screws secure the module/panel to the chassis.The module is connected electrically to the amplifier with a single multi-pin ribbon cable.Once unscrewed from the chassis, unplugging the module from this ribbon cable frees the module for removal.To insert a module, simply reverse this procedure. See – Chapter 7 NexSys <strong>Modules</strong> for more information Module Bay with Blank Panel Installed �� + + + �� + + Module Bay with Nx Ethernet Module Installed �� + + + �� + + �� On Off �� + + + �� + + + �� Standard CKi Power Processing amplifiers come with a blank panel installed in the Network bay.The amplifier must not be operated without a Network module or blank panel in place. Removable modules contain static-sensitive devices; handle modules only at static-safe workstations! a a
The owner’s role in amplifier safety / Protecting your speakers / Description of protection features Safety 6 User Responsibility Speaker Protection Protection Features p.21
Page 1 and 2: ��
Page 3: Important Safety Instructions WARNI
Page 6 and 7: 1 p.2 How to use this manual Introd
Page 8 and 9: 2 p.4 Installation Unpacking Upon u
Page 10 and 11: 2 p.6 Installation Cooling Requirem
Page 12 and 13: 3 p.8 Features Overview This chapte
Page 14 and 15: 3 p.10 Features Overview Rear Panel
Page 17 and 18: Choosing the appropriate mode / Swi
Page 19 and 20: Connecting the amplifier to AC powe
Page 21 and 22: Stereo Mode Direct Outputs A Parall
Page 23: Gain Select Switch The 3-position g
Page 27 and 28: Protection Features CKi Series ampl
Page 29 and 30: General module information / Instal
Page 31 and 32: Module Features This following page
Page 33 and 34: Module Operation The following page
Page 35: NexSys Modules 7 p.31
Page 38 and 39: 8 p.34 Service, Support & Warranty
Page 40 and 41: p.36 Constant Voltage A distributed
Page 42 and 43: d p.38 Wire Gauge Stranded Cable Le
Page 44: http://www.crestaudio.com CKi TM Ow

Nexsys Modules - Crest Audio

Create successful ePaper yourself

Delete template?

Save as template?