Spectra 20K Library User Guide - Spectra Logic
Spectra 20K Library User Guide - Spectra Logic
Spectra 20K Library User Guide - Spectra Logic
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 2. Partitioning and Configuring the <strong>Library</strong><br />
Configuring F-QIPS and G2 F-QIPs<br />
Note:<br />
Fibre Channel QIPs for the <strong>Spectra</strong> <strong>20K</strong> library come in two<br />
versions. The F-QIP, which is a 1 GB version compatible with 2<br />
GB, and the G2 F-QIP, a 2 GB version that is also supports 1GB<br />
speeds. While there are differences between the two versions, the<br />
process for configuring them is the same. For simplification<br />
purposes, the configuration steps for both of these types of QIPs<br />
are unified and designated as F-QIP/G2 F-QIP configuration.<br />
Once the Configure Controller button has been selected, the Controller Configuration<br />
window displays (Figure 2-5).<br />
Figure 2-5 The Controller Configuration window.<br />
In the Configure Controller window, you can implement the following options:<br />
Port A and Port B<br />
The ports refer to Fibre Channel connections on the back of the F-QIP/G2 F-QIP. Port<br />
A is the bottom connection and Port B is the top connection. These ports are<br />
independent and are configured individually.<br />
26
Change language