DUROPAL HPL-Compact PR ODUCT INF ... - industrie.pfleiderer.com

PRODUCT INFORMATION
Chemical properties
The surface finish of DUROPAL HPL and DUROPAL HPL-Compact is resistant to contact with most common
chemicals and substances.
Cleaning agents such as acetone and substances such as vinegar, coffee or blood leave behind no
residues on the surface. Nor will there be any changes to the surface if any of the following example list
of substances are spilt on the surface and only left there for a short time (10–15 minutes).
The panels must therefore be wiped down with a wet cloth and then rubbed dry within 10–15 minutes!
Substance Chemical formula Substance Chemical formula
Formic acid (over 10%) HCOOH
Paints and adhesives
(chemically hardening)
Aminosulphuric acid (up to 10%) NH 2 SO 3 Methylene blue C 16 H 18 N 3 CIS
Anilin dyes Millon’s reagent OHg 2 NH 2 CI
Inorganic acids (up to 10%) Sodium hydrogen sulphate NaHSO4
Arsenic acid (up to 10%) H 3 AsO 4 Sodium hypochloride NaOCI
Boric acid H 3 BO 3 Sodium thiosulphate Na 2 S 2 O 3
Iron (II) chloride solution FeCI 2 Sodium hydroxide (over 10%) NaOH
Iron (III) chloride FeCI 3 Nylander’s reagent
Esbach’s reagent Oxalic acid COOH x COOH
Fuchsine solution C 19 H 19 N 3 O Phosphoric acid (up to 10%) H 3 PO 4
Hair dyes and bleaches Picric acid C 6 H 2 OH(NO 2 ) 3
Iodine solution J Mercury dichromate HgCr 2 O 7
Limescale remover Nitric acid (up to 10%) HNO 3
Potassium hydroxide (over 10%) KOH Hydrochloric acid (up to 10%) HCI
Potassium chromate K 2 CrO 4 Sulphuric acid (up to 10%) H 2 SO 2
Potassium dichromate K 2 Cr 2 O 7 Sulphurous acid (up to 10%) H 2 SO 3
Potassium hydrogen sulphate KHSO 4 Silver nitrate AgNO 3
Potassium iodide KJ Mercury dichloride solution HgCI 2
Potassium permanganate KMnO 4
Gentian violet C 24 H 28 N 3 CI
Hydrogen peroxide (3-30%
perhydrol)
070 PI DUROPAL HPL-Solid - 0902 Page 4 of 7
H 2 O 2