DUROPAL HPL-Compact PR ODUCT INF ... - industrie.pfleiderer.com
DUROPAL HPL-Compact PR ODUCT INF ... - industrie.pfleiderer.com
DUROPAL HPL-Compact PR ODUCT INF ... - industrie.pfleiderer.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>PR</strong><strong>ODUCT</strong> <strong>INF</strong>ORMATION<br />
Physiological properties<br />
<strong>DUROPAL</strong> <strong>HPL</strong> and <strong>DUROPAL</strong> <strong>HPL</strong>-Solid are physiologically harmless and suitable for use in rooms in<br />
which foodstuffs are stored, processed and consumed. The property id confirmed by a safety declaration<br />
of the ISEGA-Forschungs- und Untersuchungs-GmbH (tested to DIN EN 1186 and DIN EN 13130).<br />
Protection against emission of formaldehyde from core materials<br />
When <strong>DUROPAL</strong> <strong>HPL</strong> is used in <strong>com</strong>bination with a core material, <strong>DUROPAL</strong> <strong>HPL</strong>, even at very low thicknesses,<br />
provides effective protection against the possible diffusion of formaldehyde out of the core material.<br />
Anti-static characteristics<br />
The specific surface resistance of <strong>DUROPAL</strong> <strong>HPL</strong> under normal environmental conditions lies between<br />
1x10 9 and 1x10 12 Ω (tested to DIN EN 61340). <strong>DUROPAL</strong> <strong>HPL</strong> surfaces therefore do not build up an<br />
electrostatic charge very easily, and do not attract dust..<br />
Quality monitoring<br />
PFLEIDERER guarantees for <strong>DUROPAL</strong> <strong>HPL</strong> the maintenance of the following standards, e.g. with regard to<br />
the product properties:<br />
• EN 438: 2005, ISO 4586 Part 1: 2004, DIN EN ISO 9001: 2000<br />
and the <strong>com</strong>bustion characteristics:<br />
• DIN 4102, AFNOR NFP 92.501, B/S 476 – parts 6.7, Eco-norm B 3800-1<br />
Colours and surface textures<br />
The <strong>com</strong>prehensive selection of colours and surface textures of our <strong>DUROPAL</strong> high-pressure laminates<br />
enables them to be used in a wide range of application areas. We will be happy to advise you in the<br />
choice of the right solution for you.<br />
For further processing, <strong>DUROPAL</strong> <strong>HPL</strong> is sanded lengthwise ready for bonding.<br />
For the rear side of <strong>DUROPAL</strong> <strong>HPL</strong>-Solid, the same specifications apply as for the front side.<br />
Product and colour match<br />
One décor – many possibilities: In the product and colour match range, melamine-faced chipboard<br />
panels, <strong>DUROPAL</strong> high-pressure laminates (<strong>HPL</strong>) and edges can be <strong>com</strong>bined in the same décor –<br />
exactly to your requirements.<br />
070 PI <strong>DUROPAL</strong> <strong>HPL</strong>-Solid - 0902 Page 6 of 7