LG_iV5_Manual_EN.pdf(4.61 MB) - Valiadis

1
4
3) PAR_04 (Parameter Lock)
6. Function Description
Set it to “12” to disable “paramter change”.
Code LCD display Description Setting range Unit
Factory
setting
PAR_04 Para. Lock Parameter lock 0 ~ 255 0
4) PAR_05 (Password)
PAR▶ Para. read
02 --- Yes ---
PAR▶ Para. write
03 --- Yes ---
When user put any four-digit number except “0” and cycle the power, only Display groupd will appear. Press [Mode]
key and PAR_05 ”Password” will be directed. If the right password is entered, all other groups can be accessed and
adjustable. To clear the password, set it to “0”. When you forget the password, enter “5052”. It is the master password
and it resets the password to “0”.
Code LCD display Description Setting range Unit
Factory
setting
PAR_05 Password Password 0 ~ 9999 0
2
3
Remove the keypad.
Install it to the copied inverter.
6-25