11 - Stirring and Dispersing - HiTec Zang GmbH
11 - Stirring and Dispersing - HiTec Zang GmbH
11 - Stirring and Dispersing - HiTec Zang GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4<br />
ViscoPakt ® -rheo<br />
The ViscoPakt-Rheo model series is equipped with<br />
precision-torque measuring. The zero torque, which<br />
depends on the rotational speed, is registered by an<br />
automatic calibration process <strong>and</strong> is used to correct<br />
the actual torque signal. This allows the on-line<br />
determination of the viscosity (via a calibration table)<br />
as well as of other rheological parameters.<br />
Technical Data<br />
<strong>Stirring</strong> <strong>and</strong> <strong>Dispersing</strong><br />
ViscoPakt Model rheo - X7 - 16 - 27 - 57 -<strong>11</strong>0 Unit<br />
Maximum torque 7 16 27 57 <strong>11</strong>0 Ncm<br />
Resolution 0.003 0.01 0.02 0.04 0.08 Ncm<br />
Reproducibility 0.05 0.1 0.2 0.4 0.8 Ncm<br />
Minimum speed 40 40 40 40 40 rpm<br />
Maximum speed 3000 2200 2200 2000 2000 rpm<br />
Speed uncertainty 0.1 0.1 0.1 0.1 0.1 %<br />
Chuck size 1 - 10 1 - 10 1 - 10 1 - 10 1 - 10 mm<br />
Type of protection<br />
controlling device<br />
20 20 20 20 20 IP<br />
Type of protection<br />
drive<br />
54 54 54 54 54 IP<br />
Approx. Weight 0.9 1.7 2.6 3.9 6 kg<br />
Motor Diameter 70 45 55 70 83 mm<br />
Length above axis<br />
(approx.)<br />
250 245 250 255 295 mm<br />
Extension<br />
diameter/length<br />
16/220 16/220 16/220 16/220 16/220 mm<br />
Max. viscosity 5,000 6,000 10,000 40,000 70,000 mPas<br />
Max. Mixing quantity<br />
(H2O)**<br />
2 8 15 30 50 Litres<br />
* Control Unit /Drive<br />
** Reference values for propeller stirrer in H2O*<br />
Interfaces<br />
Analogue:<br />
Required rotational speed 0 - 10 V, 0/4-20mA<br />
Actual rotational speed (= required value or 0) 0 - 10 V, 0/4-20mA<br />
Actual torque value 0 - 10 V, 0/4-20mA<br />
Changes to the rotational speed which are caused<br />
by load fluctuations are registered by a digital<br />
revolution counter <strong>and</strong> are electronically regulated.<br />
The rotational speed can be pre-set via an analogue<br />
input or the serial interface. The actual rotational<br />
speed <strong>and</strong> the torque are issued via the analogue<br />
outputs <strong>and</strong> the serial interface.<br />
RS232:<br />
Send: Required rotational speed<br />
Received: Required rotational speed, actual rotational speed, actual torque value<br />
Delivery Scope Measuring-stirrer drive <strong>and</strong> control unit with 2.3 m cable<br />
Order Code Description Specifications<br />
IR-VIPARHX7 ViscoPakt-Rheo-X7 7 Ncm<br />
IR-VIPARH16 ViscoPakt-Rheo-16 16 Ncm<br />
IR-VIPARH27 ViscoPakt-Rheo-27 27 Ncm<br />
IR-VIPARH57 ViscoPakt-Rheo-57 57 Ncm<br />
IR-VIPARH<strong>11</strong>0 ViscoPakt-Rheo-<strong>11</strong>0 <strong>11</strong>0 Ncm<br />
IR-VIPARS Option RS232 Interface Setpoint <strong>and</strong> actual rotational speed <strong>and</strong><br />
actual torque<br />
30 Years of Excellence in Lab Scale Technology · Over 1.000 Products around the Laboratory Reactor