MCH 6 EM Explorer Nitrox - Submarine Manufacturing and Products ...

Turn the engine starter switch to the “ON” position
(Fig. 70).
70
Pull the starter cord until a certain resistance is
felt, then pull hard (Fig. 71).
CAUTION
Do not allow the cord handle to violently go back
and hit the motor. Reposition it in order to avoid
damages at the start.
71
Move the accelerator control lever into position to
obtain the required number of revs (Fig. 72).
72
Run the compressor for about 10 minutes then leave it at a standstill for 20 minutes.
48
Start and stop