Measuring Instruments All Products Guide Vol.10 - Yokogawa

Function Generators/Universal Counters
Function Generators
FG210/FG220/FG310/FG320/FG120/FG110
http://www.yokogawa.com/tm/signalgenerator/tm-fg.htm
Frequency Range 1 µHz to 15 MHz
Frequency Range 1 µHz to 2 MHz
Function
Generators/
Universal
Counters
FG210, FG220, FG310, FG320
Synthesized Function Generators
• Generating frequencies:
1 µHz to 15 MHz (sine waves and square
waves)
1 µHz to 200 kHz (triangular, pulsed,
and arbitrary)
• Independent 2 channels (FG220/FG320)
• Multiple sweep functions and mod u la tion
functions
• Intuitive operation with large LCD panel
and touch screen
FG200/FG300 Specifi cations
• Number of signal outputs:
1 (for FG210 or FG310)
2 (for FG220 or FG320)
• Output waveforms: sine waves
Square waves (duty ratio 50% fi xed)
Triangular waves (symmetry variable)
Pulse waves (duty ratio variable)
Arbitrary waves (FG310/FG320)
• Operation mode:
continuous, trigger or gate oscillation,
DC output
• Frequency range
Sine and square waves:
1 µHz to 15 MHz
Triangular and pulse waves:
1 µHz to 200 kHz
Arbitrary waves: 1 µHz to 200 kHz
• Frequency resolution:
1 µHz or 9 digits max.
• Max. output voltage: ±10 V
(high-im ped ance load)
• Output impedance: 50 Ω ± 1%
• Sweep types:
linear, log, linear step, log step, and
arbitrary patterns (FG310/FG320)
• Sweepable parameters:
frequency, amplitude, offset phase, duty
ra tio, frequency and amplitude
• Modulation types:
AM, DSB-AM, FM, phase modulation,
off set modulation, or PWM
• External dimensions:
approx. 213 (W) × 132 (H) × 350 (D) mm
•Weight: Approx. 5 kg
FG120/FG110
Synthesized Function Generator
• Completely independent 2-channel out put
(FG120)
• Output waveform: sine, square, tri an gu lar,
ramp and pulse
• Output frequency: DC and 1 µHz to 2
MHz (sine and square waves)
• Max. output voltage: ±10 V
• Compact (A4 size), lightweight (approx.
3.6 kg) and low cost
CE * : except 706011-1/-4, 706012-1/-4 models
*
FG120/FG110 Specifi cations
• Number of signal outputs:
1 (use 706011 (FG110))
2 (use 706012 (FG120))
• Output waveforms:
sine, triangular, square wave (duty ratio
50% fi xed), ramp, pulse (duty ratio 5 to
95% variable)
• Operation mode:
continuous, trigger or gate oscillation,
DC output
• Output frequency range
Sine and square waves:
1 µHz to 2 MHz
Triangular, ramp, and pulse waves:
1 µHz to 100 kHz
• Frequency resolution: 1 µHz or 10 digits
• Max. output voltage: ±10 V*
• Output impedance: 50 Ω ± 1%
• GP-IB interface equipped as standard
• External dimensions:
approx. 213 (W) × 100 (H) × 330 (D) mm
•Weight: Approx. 3.6 kg
*(Maximum amplitude plus offset with highimpedance
load)
Universal Counters
TC110/TC120
http://www.yokogawa.com/tm/tc/tm-tc.htm
Wide Measuring Range from 1 mHz to 2 GHz (TC120)
TC110/TC120
Universal Counter
• Measuring frequency range:
1 mHz to 2 GHz (TC120)
1 mHz to 120 MHz (TC110)
• Resolution of 8 digits in 1 s
• Easy 1-action operation with 1 key
• Convenient auto-trigger function
• Measurement of revolution (TC110 only)
TC110/TC120 Specifi cations
• Frequencies A, B, and C
Measurable range
A: 1 Hz to 120 MHz (1/2-prescaler)
B: 1 mHz to 60 MHz
C: 100 MHz to 2 GHz (1/128-prescaler)
• Period B
Measuring range: 20 ns to 999.999999 s
•Time interval A→B
Measuring range: 60 ns to 999.999999 s
• Pulse width B
Measuring range: 20 ns to 999.999999 s
• Duty ratio B
Measuring range: 0.00000001 to
0.99999999
Input range: 20 ns to 999.999999 ns
• Frequency ratio A/B
Measuring range: A and B:
1 mHz to 60 MHz
•Totalization A
Input frequency range: 1 mHz to 50 MHz
Counting capacity: 0 to 999999999
•Revolution B (TC110 only)
Measuring range: 60 mrpm to 120 Mrpm
• Peak voltage A and B
Measuring voltage range:
±5 V (ATT = x1)
Frequency range: 50 Hz to 20 MHz
• External dimensions:
approx. 213 (W) × 100 (H) × 330 (D) mm
•Weight: Approx. 3.6 kg
22