Measuring Instruments All Products Guide Vol.10 - Yokogawa

Recorders
DAQMASTER
Quick Start Package
MX100 MW100
PC-based Data Acquisition System
Single Unit Data Logging
Type
MX100-E- /SL1
High speed
• 24 ch/10 ms
• 60 ch/100 ms
(MX110 modules connected)
MX100
Quick Start Package
MX100-E- /SL2
Simple! Compact Size! Ready to Run!
Fast set up- attach sensors, connect to your network, load software, and you are ready to
measure and record data
• Universal inputs (DCV/TC/RTD/DI)
• 100 ms scan speed
• Multi-interval measurement and logging
•Trending and logging software with historical viewer included
Model Suffix Code Description
MX100
Main module
Software language -E
English (with MX100 standerd software)
Supply voltage -1 100 VAC-240 VAC
Power supply inlet and power
supply cord
Power supply code
Options /DS Dual save function
/SL1 10 ch Quick Start Package
Quick Start Package
/SL2 20 ch Quick Start Package
/SL3 30 ch Quick Start Package
Type
Type
MX100-E- /SL3
High withstand voltage
600 Vrms/VDC (continuous)
3700 Vrms (1 minute)
MXStandard software (comes standard with the MX100) is designed for connections to a single unit, and is ideal for small-scale data
acquisition at 24 ch/10 ms or 60 ch/100 ms.
The main unit is equipped with a CF card that adds to the reliability of your acquisition system by backing up data upon communication
disconnections, and through the Dual recording function (optional).
R&D
Manufacturing
facilities
Equipment
facilities
With MXLOGGER (sold separately), you can quickly set up a large-scale data acquisition system of up to 1200 ch/20 units with no
programming required.
Equipped with high speed Ethernet communication (100Base-TX), enables creation of flexible measuring systems without the constraints of
total cable length and connection formats.
Measurement
group 1
Measurement
group 2
Measurement
group 3
Multi Unit Data Logging
Multi Interval Data Logging
Data acquisition intervals
set independently by
measurement group
1 unit connection
High reliability
• Dual recording (optional)
• Data backup (standard)
Max. 1200 ch/system
(connect 60 ch/20 units)
Example
1
Example
2
Example
3
By assigning input modules to one of three measurement groups, you can set measuring intervals for signals from transients to temperature
on a group-by-group basis.
Through separate waveform observation by measurement group, you can easily find correlations in waveform changes and identify trends,
improving efficiency of analysis of phenomena
Web-enabled Data Acquisition and Data Logging System
On-Demand, Remote Measuring System
Type Sold separatelyMW100-E- /SL1
Web browser monitoring
& setting changes
Supports Internet Explorer 5.0
or later, and JAVA VM/JAVA Script
Type
MW100-E- /SL2
Recorders
46
MW100
Quick Start Package
MW100-E- /SL3
Simple! Compact Size! Ready to Run!
Fast set up- attach sensors, connect to your network, confi gure with your web browser, and
you are ready to measure and record data- no special software needed. Built-in data logging
to high capacity Compact Flash media
• Real-time data monitoring with a web browser
• Universal inputs (DCV/TC/RTD/DI)
• 100 ms scan speed
• Multi-interval measurement and logging to high capacity CompactFlash media
• Email messaging and fi le transfer via FTP
Model
Added
Suffix Code Specifications
Description
Code
MW100 Main module * 1, 2
Language -E English (comes with MW100 Viewer Software)
Supply voltage -1 100 VAC-240 VAC
-2 12 to 28 VDC, with AC adapter * 3
-3 12 to 28 VDC, without AC adapter * 4
Power input type and power
supply cord
Power supply code
Options /C2 RS-232 communication interface * 5, 6
/C3 RS-422-A/485 communication interface * 5, 6
/M1 MATH functions * 6, 7
Quick Start Package
/SL1
/SL2
/SL3
*1 CF (compact flash) card not included.
*2 Modbus/TCP function comes standard
*3 “W” cannot be selected with “-2”
*4 With -3, only W (screw terminal) can be selected
10 ch Quick Start Package
20 ch Quick Start Package
30 ch Quick Start Package
Type
*5 /C2 and /C3 cannot be selected together.
*6 /C2 or /C3 must be selected when using the Modbus/RTU slave function.
Also, “/M1” must be selected for use of the Modbus/RTU master function.
*7 /M1 must be selected when using the Modbus/TCP client function.
Point a Web browser to URL of the MW100, access the MW100 at the site, and browse any data, any time.
From changing settings to Starting/Stopping data acquisition, the MW100 is easy to operate with a familiar, Web browser interface.
R&D
Manufacturing
facilities
Equipment
facilities
Multi-User & Multi-Access
Max. 60 ch/unit
(widely-distributed system)
Use measuring and networking technology to share a broad range of data from the field and access multiple
facilities simultaneously with a Web browser to check on the status of equipment.
Comes with DHCP (automatic IP address assignment) and SNTP (time correction function) for connections with
Modbus-compatible instruments (requires the /M1 MATH option on the client side)
Long Duration Memory & File Transmission
CompactFlash:
Offline
CF 2 GB (60 ch/100 ms: approximately 10 days,
60 ch/1 s: approximately 3 months)
Drag & drop
Network online (FTP: file transmission)
Point a Web browser to URL of the MW100 to send MW100 data files with drag-and-drop ease
Files can be sent automatically as they are created, or manually transferred with the CF card in the main unit