Measuring Instruments All Products Guide Vol.10 - Yokogawa

Recorders
PC-based Data
Acquisition Unit
MX100
http://www.yokogawa.com/ns/daq/daq-index_daq.htm
Get Your System Set Up Quickly, from Desktop Measurement to Large-scale Data Log ging
Overview
Connection between a single MX unit and a single PC
(measurement of 24 channels/10 ms or 60 channels/100 ms)
Input/output module
•
Main module
Straight cable
100Base-TX
Up to 20 units
Status display Measured data
Straight cable
100Base-TX
Connection between multiple MX units and a single PC
HUB
HUB
With its modular confi guration that offers fl exible scalability,
the MX100 platform enables you to con struct the optimal data
logging system for your mea sur ing en vi ron ment with the
freedom of high speed Ethernet, min i mal wiring, and lack of
constraints with regard to wir ing dis tance. The MX gets you up
and run ning in a short amount of time with a highly reliable, real
time data log ging system that meets your re quire ments for R&D,
du ra bil i ty testing, quality assurance, and facilities mon i tor ing.
Features
Maximum Performance...
High-Speed, Multi-Channel Capability, High withstand Volt age
• Shortest measurement interval of 10 ms (high-speed mea sure ment of 10 ms on 24
channels or 100 ms on 60 channels is possible).
• Possible to acquire data from up to 1,200 channels (when using Yokogawa's
proprietary software).
• Reinforced insulation between the input terminal and the case handles 3700 Vrms
for one minute, or 600 Vrms/VDC con tin u ous.
Multi-Interval Measurement
• Mixed use of three types of measurement intervals is enabled within the sys tem
(measurement intervals are set for each module).
Ease of Use...
Flexible System Confi guration
By confi guring modules, a system can be built or mod i fi ed to utilize 4 to 1,200
channels, and measurement in ter vals of 10 ms to 60 s.
Versatile PC-Based Software Options
Software developed by Yokogawa, an API, and a LabVIEW driv er are avail able.
Easy Software Setup
PC software developed by Yokogawa automatically identifies any connected
MX100s.
No Re-Wiring between Measurements
A removable terminal unit is avail able.
Data Acquisition Unit
MW100
http://www.yokogawa.com/ns/daq/daq-index_daq.htm
Combined Web Browser Monitoring and Data Logging of Plant and Equipment Data
Features
Recorders
CF card slot
Input/output modules
The various input/output
modules available are of
superior insulation.
Status display
With two input/output modules installed
RS-232,
RS-422A/485
(optional)
MW100 main module
This is the data acquisition engine
that handles data saving and
communications functions. Measured
data is saved to CompactFlash (CF)
card (sold separately). Up to six
input/output modules can be installed
on a single base plate. Any
combination of available input/output
modules can be used.
Ethernet port
(comes standard)
START/STOP button
With screw terminal option
or
DC power supply option
Web monitor
The MW100’s settings and
realtime monitoring of measured
values can be implemented with
a Web browser (requires a
browser with Java VM and Java
Script installed.).
Anytime, Anyplace...
• In a wide range of temperatures: -20 to 60°C 1,2,3,4
• Reinforced insulation: Between input terminal and case 5 ,
3700 Vrms (one minute) or 600 Vrms/VDC (continuous)
• A wide variety of network functions: HTTP, FTP, DHCP, SNTP,
E-mail, and others.
• DC power supply (12 V–28 V) option available.
Smart Logging...
• High speed measurement with a single unit (10 channels/10 ms or 60
chan nels/100 ms): Shortest measurement interval of 10 ms
• Multi-interval: Enables mixing of three different measurement intervals in a single
unit (measurement intervals can be set for each mod ule)
• Supports CompactFlash (CF) cards 6 of up to 2 GB
Continuous data acquisition is possible on 60 channels at 100 ms for ap proximately ten days
with a 2-GB card, or for three months on 60 chan nels at 1 s.
• MATH function on the main module available with the /M1 option.
• Collective data acquisition on 360 channels (via Modbus with the /M1 op tion)
44
Overview
With your web browser, access any number of MW100s with in a
plant or installed on equipment to see real-time site con di tions
and equip ment operating statuses. The func tion al ity of the Web
browser allows you to share in for ma tion from multiple locations,
and con struct highly dis trib ut ed re mote monitoring/data
ac qui si tions systems that are ideal for facilities man age ment and
equipment mon i tor ing.
1. The operating temperature range for the input modules and main mod ule. The operating
tem per a ture range of the output modules is -20 to 50°C.
2. Note that the power cord supplied with the main module differs de pend ing on the operating
tem per a ture range (see the specifi cations on page 7). If the operating temperature range
spec i fi ca tion of the sup plied stan dard power cord does not meet your requirements, we
recommend that you se lect a screw-type ter mi nal rather than the plug type for the main module
power inlet, and supply your own power input ca ble.
3. The operating temperature range of the AC adapter used with DC pow er supplies is 0 to 40°C.
4. Please consult with a representative for applications involving tem per a tures below -20°C.
5. The withstand voltage value with the MX110 input module. For the with stand voltage values
of oth er input and output modules, please re fer to the specifi cations for those modules (GS
04M10B01-01E).
6. CF card not included (sold separately).