Enterprise Library Test Guide - Willy .Net

174
Enterprise Library Test Guide
After you set up the test environment, you should tune it to make sure that there are
no inherent problems that may distort the measurements.
Tuning the Test Environment
To ensure that the test measurements are accurate, you should first make sure that
the test environment is performing well and has no constraints or performance issues
that could contaminate your measurements. The areas you should monitor are identical
to those for the application blocks. For information, see Detecting Performance
Issues.
Building Test Harnesses
A test harness is a Web application that loads the tests and runs them. The Enterprise
Library test harnesses use Web controls on a Web page to configure and run the tests.
Figure 2 illustrates the Caching Application Block test harness.