BAMBI BUCKET SERVICE MANUAL - SEI Industries Ltd.

More documents

Recommendations

Info

Section 7: Control Head Maintenance Tripline Replacement 6. Using needle nose pliers, create slack in the cable by pulling the copper swage close to the drum. 7. Use a small stiff wire through the hole in the spring reel drum to remove the end of the tripline from the locking finger. 8. The photo shows the tripline end being pulled from the reel. We Engineer Solutions Bambi Bucket Service Manual – Models 5566-HL9800 (Version D) 31
Section 7: Control Head Maintenance Tripline Replacement Winding the Spring Reel If the spring reel tension has been released, the spring reel must be rewound before the new tripline is installed. 1. Wind the spring reel in the direction indicated by the arrow stamped on the cover to its maximum, then back off until the three holes in the reel are positioned at the top (approximately one full turn). 2. Secure with vice grips to prevent the reel from unwinding. Installing a New Tripline Before installing, check the trip block for grooves or rifling. Also, check that the bullet moves freely. If it does not, ream out the trip block. 1. Pass the tripline through the trip block’s bottom hole upwards to the top. We Engineer Solutions Bambi Bucket Service Manual – Models 5566-HL9800 (Version D) 32
Page 1 and 2: BAMBI BUCKET (5566-HL9800 MODELS) S
Page 3 and 4: Table of Contents Section 1: Introd
Page 5 and 6: IDS System, Model 5566.............
Page 7 and 8: Section 2: Deploying the Bambi Buck
Page 15 and 16: Section 3: Using Accessories Using
Page 17 and 18: Section 3: Using Accessories Using
Page 19 and 20: Section 4: Making Adjustments Adjus
Page 21 and 22: Section 5: Packing and Storage Pack
Page 29 and 30: Section 6: Troubleshooting Guide Ge
Page 31 and 32: Section 6: Troubleshooting Guide Ge
Page 33 and 34: Section 7: Control Head Maintenance
Page 35: Section 7: Control Head Maintenance
Page 49 and 50: Section 8: General Maintenance and
Page 79 and 80: Section 9: Specifications and Parts
Page 87 and 88:
Section 9: Specifications and Parts
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Section 10: Warranty Capacity and W
Page 101 and 102:
Section 11: Drawings Capacity and W
Page 103:
Section 11: Drawings Capacity and W
show all

BAMBI BUCKET SERVICE MANUAL - SEI Industries Ltd.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?