BAMBI BUCKET SERVICE MANUAL - SEI Industries Ltd.

More documents

Recommendations

Info

Section 8: General Maintenance and Repairs Bambi Bucket Shell Repairs 3. Pull the bolt up through the hole. Turn it until the clamp lines up with the hole. 4. Place the top of the clamp over the bolt. 5. Tighten the nut by hand. Caution Tightening the nut with tools may break the bolt away from the lower clamp. Overtightening can also deform the clamp and cause leaks. We Engineer Solutions Bambi Bucket Service Manual – Models 5566-HL9800 (Version D) 63
Section 8: General Maintenance and Repairs Temporary Repairs Using Glue Temporary Repairs Using Glue Important Note Allow repair to harden for 24 hours at room temperature before using the item. Applying the Glue Small scrapes, damaged fabric coating or pinholes, which are not leaking, can be repaired with glue only. They do not require a patch. (A small scrape is defined as damage to the outer fabric coating only. A pinhole is defined as a small puncture that is not leaking.) However, damage to the base fabric must be repaired with a patch. 1. Fill the weight bag with water prior to beginning repairs. 2. Clean the area to be repaired with an abrasive pad dampened with solvent. Remove all traces of masking tape, if previously used. If possible, place a piece of masking tape on the back side of the item being repaired. Apply masking tape on the backside of the tear. We Engineer Solutions Bambi Bucket Service Manual – Models 5566-HL9800 (Version D) 64
Page 1 and 2:
BAMBI BUCKET (5566-HL9800 MODELS) S
Page 3 and 4:
Table of Contents Section 1: Introd
Page 5 and 6:
IDS System, Model 5566.............
Page 7 and 8:
Section 2: Deploying the Bambi Buck
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Section 3: Using Accessories Using
Page 17 and 18: Section 3: Using Accessories Using
Page 19 and 20: Section 4: Making Adjustments Adjus
Page 21 and 22: Section 5: Packing and Storage Pack
Page 29 and 30: Section 6: Troubleshooting Guide Ge
Page 31 and 32: Section 6: Troubleshooting Guide Ge
Page 33 and 34: Section 7: Control Head Maintenance
Page 49 and 50: Section 8: General Maintenance and
Page 67: Section 8: General Maintenance and
Page 79 and 80: Section 9: Specifications and Parts
Page 99 and 100: Section 10: Warranty Capacity and W
Page 101 and 102: Section 11: Drawings Capacity and W
Page 103: Section 11: Drawings Capacity and W
show all

BAMBI BUCKET SERVICE MANUAL - SEI Industries Ltd.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?