10. PULLERS

More documents

Recommendations

Info

KU1001 KU1002 KU1000 PISTON RING COMPRESSORS Type 100 • for tensioning piston rings when fitting pistons and cylinders • packing size: 1 Order no. Kukkono. Piston Ø Height mm Weight kg EAN KU1000 100-0 40 - 75 50 0,13 4021176428203 KU1001 100-1 57 - 125 80 0,28 4021176022203 KU1002 100-2 90 - 175 80 0,33 4021176022388 PISTON PIN DRIVER 100 mm Type 102 KU1021 • Ø 100 mm • enable easy, gentle removal and installation of piston pins without damage to the piston • fits for all motors of passenger cars and motor bicycles • with three supplementary pressure pads • weight 0,15 kg • packing size: 1 EAN 4021176022791 PISTON RING SPREADERS Type 101 • for spreading piston rings when mounting them into the piston or when removing them from the piston • packing size: 1 Order no. Kukkono. Piston Ø Length mm Weight kg EAN KU1011 101-1 50-100 200 0,25 4021176022531 KU1012 101-2 90-150 240 0,37 4021176022616 KU1032 KU1031 KU1033 VALVE LIFTERS • for assembling valves • packing size: 1 A= opening S= straight jaws T= curved jaws Order no. Kukkono. A mm Jaws Weight kg EAN KU1031 103-1 •small passenger cars KU1032 103-2 •small and medium-size passenger cars KU1033 103-3 •large passenger cars and light commercial vehicles 60 - 230 S 1,20 4021176022876 40 - 230 S + T 1,35 4021176022951 115 - 290 S + T 3,25 4021176023378 10/12 13.12.2011
PULLER FOR CAM WHEELS KU1180 Kukkono. 118-0 • AUDI/VW TDI 4, 6 and 8-cylinder diesel engines • AUDI/VW V6 and V8 gasoline engines • from year model 1998 and on • includes 2 pcs of 1-jaw arms • includes 2 pcs of 2-jaws arms • weight 1,20 kg • packing size: 1 EAN 4021176860904 SPROCKET MULTI-LOCK TIMING DEVICE KUT143 Kukkono. T-143 • universal type for both double camshaft engines and the V-engines equipped with four camshafts • for diesel engines in which the cam gear and feed pump gear are close with each other • for locking the sprocket while changing the timing belt • weight 0,32 kg • packing size: 1 EAN 4021176893346 SPROCKET HOLDING TOOL KUT144 Kukkono. T-144 • universal type, for most passenger vehicles • for safe loosening of the fastening nuts of cam and feed pump - set the tool into the holes of gear, hold back and loosen the nut with suitable wrench, this way no damage will cause to the engine • for rotating the camshaft e.g. when adjusting the valves • weight 1,00 kg • packing size: 1 EAN 4021176893353 CLAMP SPRING SPREADER KU1190 Kukkono. 119-0 • VW and Audi • for mounting and removing clamp spring on and from the spherical flanges of exhaust system • weight 0,40 kg • packing size: 1 EAN 402176248368 BATTERY TERMINAL PULLER Type 41-1 KU411 • 2-arms, jointed • basic model for pulling off battery terminals and other small parts • width 65 mm • depth 65 mm • max. torque 25 Nm • weight 0,20kg • packing size: 1 EAN 4021176015038 Adjustable CYLINDER NUT WRENCH IKH7667 • content: - cylinder nut wrench - pins 2,5 - 4 mm • 3 - 5 mm • 6 - 8 mm • 7 - 9 mm • plastic case • packing size: 1/20 EAN 6418914720244 10/13 13.12.2011
Page 1 and 2: 10. PULLERS Arm sets ..............
Page 3 and 4: PULLER SET 2 and 3-arms + Wera Zykl
Page 5 and 6: PULLERS Type 204 • 2-arms • mad
Page 7 and 8: BALL BEARING EXTRACTORS Type 70 •
Page 9 and 10: PULLER Type 18 • mould forged ste
Page 11: EXTRACTORS FOR BALL JOINT Type 128
Page 15 and 16: BEARING PULLER SET IKH7096 • pull
Page 17 and 18: TIMING GEAR LOCKING TOOL SET IKH768

10. PULLERS

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?