Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>PULLERS</strong><br />
Type 204<br />
• 2-arms<br />
• made of drop forged steel<br />
• for pulling ball bearings, gears, pinions,<br />
steering arms etc.<br />
• the clamp forces the arms tightly up<br />
against the part to be removed<br />
Order no.<br />
Kukko<br />
no.<br />
Width<br />
mm<br />
Depth<br />
mm<br />
• when the side clamp is tightened,<br />
it forces the claws in under the<br />
part to be pulled, thus prying it<br />
away before the actual pulling<br />
process<br />
• packing size: 1<br />
L/B= length of bolt/base<br />
L/B mm<br />
Max.<br />
torque<br />
Nm<br />
Weight<br />
kg<br />
KU2041 204-1 80 90 105/19 100 1,30 4021176028243<br />
KU2042 204-2 100 100 130/22 120 2,00 4021176028328<br />
KU2043 204-3 150 140 180/24 175 3,00 4021176028403<br />
EAN<br />
<strong>PULLERS</strong><br />
Type 210<br />
• 2-arms<br />
• made of drop forged steel<br />
• the claws on the puller have conical blades<br />
on one side to facilitate loosening of such<br />
closely seated parts as axle bearings, ball<br />
bearing races and pinions<br />
• normal claws on the other side<br />
• the arms are reversible - inside and<br />
outside pulling<br />
• the side clamp forces the claws in behind<br />
such parts to enable their removal<br />
• packing size: 1<br />
Order no.<br />
Kukko<br />
no.<br />
Width<br />
mm<br />
Depth<br />
mm<br />
L/B mm<br />
L/B= length of bolt/base<br />
Max.<br />
torque<br />
Nm<br />
Weight<br />
kg<br />
KU2101 210-1 95 170 210/22 100 2,60 4021176030383<br />
KU2102 210-2 135 270 325/24 140 4,30 4021176030468<br />
EAN<br />
Hydraulic<br />
PULLER SET<br />
10-tn<br />
Type 800<br />
KU845150<br />
Kukkono. 845-150<br />
• 2 and 3-arms<br />
• the set includes:<br />
- 3 pcs of arms depth 100 mm,<br />
width 50 – 100 mm<br />
- 3 pcs of arms depth 150 mm,<br />
width 75 – 150 mm<br />
- 2 and 3-arms body parts<br />
- hydraulic ram 10 tons<br />
- extension parts 50 and 100 mm<br />
- storing box<br />
• operation: back off the upper spindle so that the piston can return to its starting position.<br />
Place the pressure pad on the thrust bolt and screw the hydraulic ram into the puller’s head<br />
such that the ram fits up snugly on the shaft. Actuation of the upper spindle increases the<br />
pressure and pulls the part off. Attach one or more spindle extension to the thrust bolt if the<br />
length of the hydraulic ram is insufficient. Finally, mount the pressure pad on the spindle<br />
extension.<br />
• after use, loosen the hydr. screw<br />
• packing size: 1<br />
EAN 4021176717871<br />
2/3-arms combination<br />
PULLER<br />
Type 202<br />
KU2031<br />
Kukkono. 203-1<br />
• 2/3-arms, with joint arms<br />
• with reversible double-end arms -<br />
inner and outer pulling<br />
• the claws of the arms are narrow from the<br />
other head and wide on the other head<br />
• made of drop forged steel<br />
• arms: width 180 mm, depth 80 mm<br />
• length of bolt/base: 135/17 mm<br />
• max. torque 75 Nm<br />
• weight 1,2 kg<br />
• packing size: 1<br />
EAN 4021176027741<br />
<strong>PULLERS</strong><br />
Type 201<br />
• 2-arms, with joint arms<br />
• reversible arms - inner and outer pulling<br />
• the claws of the arms are narrow from the<br />
other head and wide on the other head<br />
• made of drop forged steel<br />
• packing size: 1<br />
L/B= length of bolt/base<br />
Order no.<br />
Kukko<br />
no.<br />
Width<br />
mm<br />
Depth<br />
mm<br />
L/B mm<br />
Max.<br />
torque<br />
Nm<br />
Weight<br />
kg<br />
KU2011 201-1 150 85 135/17 75 0,90 4021176026591<br />
KU2012 201-2 220 130 210/22 150 2,40 4021176026676<br />
EAN<br />
10/5<br />
12.12.2011
Change language