MODULAR RACK & PINION SYSTEM - Andantex USA Inc.

MODULAR RACK & PINION SYSTEM
RACKS
WITH STRAIGHT (SPUR) TEETH
SERIES A30
Soft Rack
Quality DIN 9 e 27 (~AGMA 9)
20° Pressure Angle
Module L1 teeth b h ho a l
No.
holes h1 d1 d2 t a1 d3 Fp
mass
kg. Part No.
1.0 499.51 159 10 9.8 8.8 without holes 0.34 A30-011-050
1.0 999.03 318 10 9.8 8.8 without holes 0.09 0.68 A30-011-100
1.0 Companion Rack for assembly A30-011-999
1.5 499.51 106 15 14.8 13.3 without holes 0.8 A30-1.51-050
1.5 999.03 212 15 14.8 13.3 without holes 0.09 1.6 A30-1.51-100
1.5 1998.05 424 15 14.8 13.3 without holes 3.1 A30-1.51-200
1.5 Companion Rack for assembly A30-1.51-999
2.0 502.65 80 20 19.75 17.75 without holes 1.4 A30-021-050
2.0 999.03 159 20 19.75 17.75 without holes 0.09 2.8 A30-021-100
2.0 1998.05 318 20 19.75 17.75 without holes 5.6 A30-021-200
2.0 Companion Rack for assembly A20-021-999
2.5 502.65 64 25 24.75 22.25 without holes 2.1 A30-2.51-050
2.5 997.46 127 25 24.75 22.25 without holes 0.100 4.2 A30-2.51-100
2.5 2002.76 255 25 24.75 22.25 without holes 8.4 A30-2.51-200
2.5 Companion Rack for assembly A30-2.51-999
3.0 499.51 53 30 29.75 26.75 without holes 3.1 A30-031-050
3.0 999.03 106 30 29.75 26.75 without holes 0.100 6.2 A30-031-100
3.0 1998.05 212 30 29.75 26.75 without holes 12.4 A30-031-200
3.0 Companion Rack for assembly A20-031-999
4.0 502.65 40 40 39.7 35.7 without holes 5.5 A30-041-050
4.0 1005.31 80 40 39.7 35.7 without holes 0.110 11 A30-041-100
4.0 1998.05 159 40 39.7 35.7 without holes 22 A30-041-200
4.0 Companion Rack for assembly A20-041-999
5.0 502.65 32 50 49.7 44.7 without holes 8.6 A30-051-050
5.0 1005.31 64 50 49.7 44.7 without holes 0.110 17.2 A30-051-100
5.0 2010.62 128 50 49.7 44.7 without holes 34.4 A30-051-200
5.0 Companion Rack for assembly A30-051-999
6.0 508.94 27 60 59.65 53.65 without holes 12.3 A30-061-050
6.0 999.03 53 60 59.65 53.65 without holes 0.110 24.5 A30-061-100
6.0 1998.05 106 60 59.65 53.65 without holes 49 A30-061-200
6.0 Companion Rack for assembly A30-061-999
8.0 502.65 20 80 79.6 71.6 without holes 21.4 A30-081-050
8.0 1005.31 40 80 79.6 71.6 without holes 0.110 42.7 A30-081-100
8.0 2010.62 80 80 79.6 71.6 without holes 85.4 A30-081-200
8.0 Companion Rack for assembly A30-081-999
Material AISI 1045 (C45) with tensile strength = 650 N/mm 2 (95,000 PSI).
Rack ends are machined for continuous mounting.
Fp is the max cumulative pitch error for the corresponding rack length.
Dimensions are in mm and are subject to change - consult factory.
8
800-713-6170 • www.andantex.com • info@andantex.com