Aspire cooker service procedures - Swift Owners Club

More documents

Recommendations

Info

The Thermocouple, continued If the thermocouple is from the burner to the shut off mechanism. Trace back to the shut off valve and pull off the spade fitting. Use an 8mm spanner to remove the locking nut holding the thermocouple probe to the burner cup.
Disconnect and remove the <strong>cooker</strong> from its housing. The Ignition Electrode Lift the hob pressing and check the connection of the relevant electrode on the 12v generator. If the electrode is faulty then pull the spade fitting off the terminal point. The electrodes for the oven and grill are secured by a single self tapping screw. Remove this and gently pull the electrode through the cavity box and replace.
Page 1 and 2: Swift ‘Aspire’ Cooker Service P
Page 3 and 4: The Fascia Remove control knobs Rem
Page 5 and 6: The Hob Pressing Remove pan support
Page 7 and 8: Lift pressing from the front and re
Page 9: The Thermocouple, continued There a
Page 13 and 14: The Shut Off Mechanism Disconnect a
Page 15 and 16: The Shut Off Mechanism, continued P
Page 17 and 18: The 12v Spark Generator, continued
Page 19 and 20: The 12v Fans Disconnect and remove
Page 21 and 22: The 12v Fans, continued Using an ad
Page 23 and 24: The Grill Burner, continued Unscrew
Page 25 and 26: The Grill Burner, continued Once th
Page 27 and 28: The Hob/Grill Gas Burner Valve, con
Page 29 and 30: The Thermostatc Valve, continued A

Aspire cooker service procedures - Swift Owners Club

Create successful ePaper yourself

Delete template?

Save as template?