Aspire cooker service procedures - Swift Owners Club

More documents

Recommendations

Info

The Shut Off Mechanism, continued The shut off’s wiring is as follows; 1. Hotplate (2 x Red wires), 2. Front left hob burner, 3. Front right burner, 4. Rear right burner. Trace the black thermocouples back to their relevant burner valves. It is imperative to ensure that both types of thermocouples for each burner correspond on the shut off terminals. If both are not correctly matched then at least two hob burners will not function.
The Shut Off Mechanism, continued Pull off all spade fittings from all four terminals to remove the shut off mechanism from the <strong>cooker</strong>. Take care not to misplace the thin metal pin/barrel from the glass lid hinge.
Page 1 and 2: Swift ‘Aspire’ Cooker Service P
Page 3 and 4: The Fascia Remove control knobs Rem
Page 5 and 6: The Hob Pressing Remove pan support
Page 7 and 8: Lift pressing from the front and re
Page 9 and 10: The Thermocouple, continued There a
Page 11 and 12: Disconnect and remove the cooker fr
Page 13: The Shut Off Mechanism Disconnect a
Page 17 and 18: The 12v Spark Generator, continued
Page 19 and 20: The 12v Fans Disconnect and remove
Page 21 and 22: The 12v Fans, continued Using an ad
Page 23 and 24: The Grill Burner, continued Unscrew
Page 25 and 26: The Grill Burner, continued Once th
Page 27 and 28: The Hob/Grill Gas Burner Valve, con
Page 29 and 30: The Thermostatc Valve, continued A

Aspire cooker service procedures - Swift Owners Club

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?