Aspire cooker service procedures - Swift Owners Club

More documents

Recommendations

Info

The Thermostatic Valve As with the ‘Hob/Grill Gas Burner Valve’, remove all necessary screws and parts to enable access to the gas rail or manifold. You will need a PZ2 size screwdriver to remove the screws holding the thermostat mounting bracket to the thermostat and the fascia mounting plate. Start by removing the screws at the back.
The Thermostatc Valve, continued A 13mm spanner will lossen the nut holding the oven burner feed pipe to the thermostat valve. Use a 17mm spanner or adjustable to loosen nut holding thermostat valve to the gas rail or manifold.
Page 1 and 2: Swift ‘Aspire’ Cooker Service P
Page 3 and 4: The Fascia Remove control knobs Rem
Page 5 and 6: The Hob Pressing Remove pan support
Page 7 and 8: Lift pressing from the front and re
Page 9 and 10: The Thermocouple, continued There a
Page 11 and 12: Disconnect and remove the cooker fr
Page 13 and 14: The Shut Off Mechanism Disconnect a
Page 15 and 16: The Shut Off Mechanism, continued P
Page 17 and 18: The 12v Spark Generator, continued
Page 19 and 20: The 12v Fans Disconnect and remove
Page 21 and 22: The 12v Fans, continued Using an ad
Page 23 and 24: The Grill Burner, continued Unscrew
Page 25 and 26: The Grill Burner, continued Once th
Page 27: The Hob/Grill Gas Burner Valve, con

Aspire cooker service procedures - Swift Owners Club

Create successful ePaper yourself

Delete template?

Save as template?