Aspire cooker service procedures - Swift Owners Club

More documents

Recommendations

Info

The Grill Burner, continued Using a stanley knife or similar cut through the silver insulation tape holding the insulation cover to the grill box. Gently pull the insulation cover through the <strong>cooker</strong> and clear the top of the grill box of any ‘debris’. Using a thin flat headed screwdriver or similar carefully prize off the two starlock washers holding the grill burner spigots to the box roof.
The Grill Burner, continued Once the starlock washers have been removed the grill burner tube and attached mesh can then be lowered and from the grill box roof and removed from the <strong>cooker</strong>. It is advisable that new starlock washers are used when refitting or replacing the grill burner.
Page 1 and 2: Swift ‘Aspire’ Cooker Service P
Page 3 and 4: The Fascia Remove control knobs Rem
Page 5 and 6: The Hob Pressing Remove pan support
Page 7 and 8: Lift pressing from the front and re
Page 9 and 10: The Thermocouple, continued There a
Page 11 and 12: Disconnect and remove the cooker fr
Page 13 and 14: The Shut Off Mechanism Disconnect a
Page 15 and 16: The Shut Off Mechanism, continued P
Page 17 and 18: The 12v Spark Generator, continued
Page 19 and 20: The 12v Fans Disconnect and remove
Page 21 and 22: The 12v Fans, continued Using an ad
Page 23: The Grill Burner, continued Unscrew
Page 27 and 28: The Hob/Grill Gas Burner Valve, con
Page 29 and 30: The Thermostatc Valve, continued A

Aspire cooker service procedures - Swift Owners Club

Create successful ePaper yourself

Delete template?

Save as template?