Commercial Heating - Ferroli

Air Source Heat Pumps HMP
Reverse cycle (active reverse cycle) for OUTDOOR or INDOOR installation
Suitable for family houses
or small apartment
buildings. Heat pumps
do not require gas
connections or the
installation of flues. Ideal
for newbuild as well as
being a cost effective
retrofit solution in houses
which currently rely upon
liquid fuel systems (oil,
LPG). The units can also
be integrated with a solar
heating system.
Features and Benefits
Three-speed heating circuit pump on the unit
Multistage high pressure heating circuit pump on the unit
Multistage high efficiency heating circuit pump on the unit
Snow protection cover (for outdoor installation)
Three-stage supplementary electric heaters
Remote thermostat
Wired or wireless remote control unit
Humidity control sensors in cooling mode
Three-way valve for the management of domestic hot water on the unit
Single-phase power supply (in versions up to 13kW)
Built-in microprocessor control unit to manage the heating/cooling system
Expansion modules for management of multiple zones
Integrated management of multiple units in cascade (max.16)
Legionella protection function
Digital input for management of special tariff time bands
Timer/programmer for timed domestic hot water production (with external storage cylinder)
Outdoor probe for climate control supplied as standard
Built-in room humidity control with humidity sensor (optional) for cooling in summer
Control of solar heating system integration
Operating hour counter for the compressor and pumps
Integrated management (with three heat output levels) of the supplementary electric heater (optional)
Ductable for indoor installation
40