VDO Marine - Howard Instruments
VDO Marine - Howard Instruments
VDO Marine - Howard Instruments
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Speedometer<br />
Sumlog Alarm Threshold<br />
Setting of unit and Alarm Threshold<br />
<br />
<br />
Battery Power On T. 30 (8-pin - Pin1)<br />
Ignition Power Off T. 15 (8-pin - Pin4)<br />
Press and hold Mode key (14-pin - Pin 12)<br />
Ignition Power On T. 15<br />
Release Mode key<br />
<br />
Press and hold Mode Key<br />
By briefly pressing the Mode key, you can switch between<br />
24h and 12h (AM/PM) clock format.<br />
<br />
<br />
Press and hold Mode key<br />
Press the Mode key to change the water temperature<br />
unit from °C to °F.<br />
<br />
Press and hold Mode key<br />
Press Mode key briefly to change the water depth<br />
unit from von m to ft.<br />
Press and hold Mode key<br />
<br />
Press and hold Mode key<br />
<br />
Press and hold Mode key<br />
Set alarm threshold is displayed; the first digit flushes.<br />
<br />
<br />
<br />
Press Mode key briefly<br />
The flushing digit increases by 1. If the flushing digit is “9”,<br />
the display returns to “0”.<br />
Press and hold Mode key<br />
The next lower digit flushes in the display.<br />
<br />
Press Mode key briefly<br />
The flushing digit increases by 1. If the flushing digit is “9”,<br />
the display returns to “0”.<br />
Continue until the complete alarm threshold is set.<br />
Press and hold Mode key<br />
Switch Off Ignition power (T15).<br />
This saves the unit and the alarm threshold in the display.<br />
78