Springs and Spring Washers - Electronic Fasteners Inc

More documents

Recommendations

Info

STOCK PACKAGED ASSORTMENTS AND KITS PACKAGED ASSORTMENTS 28 selections of the most-needed stock springs and stock washers. Belleville Spring Washers Curved Spring Washers Finger Spring Washers Wave Spring Washers Compression Springs Extension Springs Torsion Springs Constant-Force Springs Metric Compression Springs Metric Extension Springs For experimental, development, prototype and maintenance work Engineers, designers and specifiers of coiled springs and spring washers find these packaged assortments of Associated Spring Raymond items particularly convenient. Repair and maintenance personnel will also find our assortments ideally suited to the upkeep of industrial and production equipment. All our assortments are designed to combine our most-needed stock springs or washers in easy-to-use, yet economical kits. The six-drawer metal chest shown above comes at no additional charge when you order any six assortments, listed on pages 180-189, at one time. SPEC Assortments are packaged in compartmented metal drawers. Catalog part numbers of all included items are individually listed inside the hinged cover for easy identification and re-order. Stock Packaged Assortments STOCK BELLEVILLE SPRINGS WASHERS STANDARD ASSORTMENT NO. B-402-AS Includes 75 items (150 pieces) from our line of SPEC stock Belleville spring washers. Designed to carry high loads in limited space, they can be used singly, in series, in parallel or in series-parallel. Offering good fatigue life, they are made of highquality spring steel (the S suffix denotes stainless steel). 180 Includes 2 pieces each of the following part numbers: B0187-007 B0187-007-S B0187-010 B0187-010-S B0250-009 B0250-009-S B0250-013 B0250-013-S B0281-010 B0281-013 B0281-015 B0281-015-S B0312-011 B0312-011-S B0312-017 B0312-017-S B0343-013 B0343-016 B0343-019 B0375-015 B0375-015-S B0375-018 B0375-019 B0375-020 B0375-020-S B0437-016 B0437-020 B0437-022 B0437-023 B0499-025 B0500-018 B0500-018-S B0500-022 B0500-022-S B0500-025 B0500-025-S B0500-038 B0500-038-S B0562-028 B0625-022 B0625-022-S B0625-032 B0625-032-S B0625-047 B0625-047-S B0637-032 B0687-034 B0750-028 B0750-028-S B0750-034 B0750-036 B0750-040 B0750-040-S B0750-052 B0750-056 B0750-056-S B0875-031 TO ORDER: WWW.ASRAYMOND.COM OR SEE PHONE & FAX NUMBERS ON BACK COVER B0875-045 B0937-045 B0937-045-S B0950-047 B1000-035 B1000-035-S B1000-043 B1000-050 B1000-050-S B1000-073 B1000-073-S B1125-038 B1125-038-S B1125-053 B1125-053-S B1125-056 B1125-056-S B1125-078 Numbers with suffix "S" are made of stainless steel. See page 98 for complete information on our Belleville Spring Washers.
STOCK BELLEVILLE SPRINGS WASHERS HEAVY ASSORTMENT NO. B-401-AH Contains 49 different items (98 pieces) of larger size Belleville Spring Washers. Includes 2 pieces each of the following part numbers: B1250-040 B1250-040-S B1250-051 B1250-062 B1250-062-S B1250-089 B1250-089-S B1262-060 B1375-044 B1375-044-S B1375-067 B1500-045 B1500-045-S B1500-060 B1500-070 B1500-070-S B1500-072 B1500-072-S B1500-102 B1500-107 B1500-107-S B1750-057 B1750-057-S B1750-085 B1750-085-S B1875-086 B1875-086-S B1875-127 B2000-065 B2000-065-S B2000-084 B2000-097 B2000-097-S B2000-142 B2250-073 B2250-102 B2250-111 B2250-150 B2250-159 B2500-080 B2500-080-S B2500-120 B2500-120-S B2500-175 B2750-087 B2750-132 B3000-093 B3000-135 B3000-143 PACKAGED ASSORTMENTS Numbers with suffix "S" are made of stainless steel. See page 98 for complete information on our Belleville Spring Washers. STOCK CURVED SPRING WASHERS Combines 65 items (130 pieces). Precision engineered and made of high-quality spring steel (the S suffix denotes stainless steel), our SPEC curved spring washers may be pressed flat without losing free height. ASSORTMENT U-701-A Includes 2 pieces each of the following part numbers: U093-0045-S U093-0056-S U125-0040-S U125-0050-S U125-0060-S U125-0072-S U125-0075-S U125-0088-S U138-0045-S U138-0070-S U138-0082-S U138-0100-S U164-0050-S U164-0075-S U164-0090-S U164-0113 U190-0050-S U190-0060-S U190-0065-S U190-0090-S U190-0113 U190-0140 U216-0065-S U216-0100-S U216-0120 U216-0150 U250-0065-S U250-0075-S U250-0082-S U250-0110 U250-0145 U250-0185 U281-0085-S U281-0120 Numbers with suffix "S" are made of stainless steel. See page 112 for complete information on our Curved Spring Washers. U312-0075-S U312-0090-S U312-0110 U312-0130 U312-0170 U312-0210 U343-0100-S U343-0150 U375-0090-S U375-0100-S U375-0110 U375-0130 U375-0150 U375-0160 U437-0100-S U437-0120 U437-0150 U437-0180 U437-0210 U500-0113 U500-0140 U500-0170 U500-0180 U500-0210 U500-0211 U562-0120-S U562-0180 U625-0140 U625-0210 U750-0160 U750-0210 STOCK FINGER SPRING WASHERS Contains 20 items (40 pieces) from our line of SPEC stock finger spring washers. They can be used as take up for large-tolerance variations, anti-rattle applications, end-play eliminators or cushioning devices. Made of high-quality spring steel, all these parts have a finger height of approximately 1/8 inch (3.2 mm). ASSORTMENT F-502-A Includes 2 pieces each of the following part numbers: F0595-010 F0728-006 F0846-006 F0846-008 F0926-007 F0926-010 F1004-006 F1004-007 F1164-009 F1164-010 See page 120 for complete information on our Finger Spring Washers. F1164-018 F1240-008 F1240-009 F1240-010 F1360-011 F1360-014 F1555-014 F1555-018 F1830-016 F2022-019 TO ORDER: WWW.ASRAYMOND.COM OR SEE PHONE & FAX NUMBERS ON BACK COVER 181
Page 2 and 3:
In addition to the SPEC products de
Page 4 and 5:
120-121 56-63 64-87 112-117 4-45 46
Page 6 and 7:
COMPRESSION SPRINGS COMPRESSION SPR
Page 8 and 9:
COMPRESSION SPRINGS 6 MUSIC WIRE ST
Page 10 and 11:
COMPRESSION SPRINGS 8 MUSIC WIRE ST
Page 12 and 13:
COMPRESSION SPRINGS 10 MUSIC WIRE S
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
MUSIC WIRE Outside Diameter (OD) Ca
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
COMPRESSION SPRINGS MUSIC WIRE STAI
Page 48 and 49:
HIGH PERFORMANCE COMPRESSION SPRING
Page 50 and 51:
TO ORDER: WWW.ASRAYMOND.COM OR SEE
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
HEAVY DUTY COMPRESSION SPRINGS HEAV
Page 60 and 61:
HEAVY DUTY COMPRESSION SPRINGS 58 S
Page 62 and 63:
HEAVY DUTY COMPRESSION SPRINGS 60 S
Page 64 and 65:
HEAVY DUTY COMPRESSION SPRINGS STOC
Page 66 and 67:
EXTENSION SPRINGS EXTENSION SPRINGS
Page 68 and 69:
Outside Diameter (OD) Catalog Numbe
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
TORSION SPRINGS TORSION SPRINGS Sto
Page 92 and 93:
TORSION SPRINGS - STAINLESS STEEL M
Page 94 and 95:
TORSION SPRINGS - MUSIC WIRE M Sugg
Page 96 and 97:
CONICAL COMPRESSION SPRINGS Stock s
Page 98 and 99:
CONTINUOUS LENGTH SPRINGS Round Wir
Page 100 and 101:
BELLEVILLE SPRING WASHERS Stock siz
Page 102 and 103:
BELLEVILLE SPRING WASHERS 100 BELLE
Page 104 and 105:
CLOVER ® DOME SPRING WASHERS Stock
Page 106 and 107:
CLOVER ® DOME SPRING WASHERS Catal
Page 108 and 109:
METRIC DISC SPRING WASHERS Stock si
Page 110 and 111:
METRIC DISC SPRINGS 108 METRIC DISC
Page 112 and 113:
METRIC DISC SPRINGS METRIC DISC SPR
Page 114 and 115:
CURVED SPRING WASHERS Precision eng
Page 116 and 117:
WAVE SPRING WASHERS Stock sizes in
Page 118 and 119:
WAVE SPRING WASHERS COMPRESSION TYP
Page 120 and 121:
MULTIWAVE COMPRESSION SPRINGS Stock
Page 122 and 123:
FINGER SPRING WASHERS Stock sizes i
Page 124 and 125:
URETHANE SPRINGS URETHANE COMPRESSI
Page 126 and 127:
STOCK URETHANE COMPRESSION SPRINGS
Page 128 and 129:
600 STOCK URETHANE COMPRESSION SPRI
Page 130 and 131:
STOCK URETHANE COMPRESSION SPRINGS
Page 132 and 133: URETHANE SPRINGS STOCK URETHANE FUL
Page 134 and 135: GAS SPRINGS NITROGEN GAS SPRINGS St
Page 136 and 137: GAS SPRINGS 134 N SERIES Catalog Nu
Page 142 and 143: GAS SPRINGS 140 S SERIES Catalog Nu
Page 148 and 149: S SERIES Catalog Number S14UBM0500
Page 150 and 151: GAS SPRING END FITTINGS PART NUMBER
Page 152 and 153: GAS SPRING MOUNTING HARDWARE PART N
Page 160 and 161: INTERLOCK GARTER SPRINGS Stock size
Page 162 and 163: GARTER SPRINGS INTERLOCK GARTER SPR
Page 164 and 165: RETAINING RINGS W O.D. HOUSING SIZE
Page 166 and 167: W I.D. A SHAFT SIZE t Light duty si
Page 168 and 169: Internal Retaining Rings (Circlip s
Page 170 and 171: FASTENERS - HEX HEAD CAP SCREWS AND
Page 172 and 173: FASTENERS UNC (USS) Part No. TPI-8
Page 174 and 175: SPRING PINS, PINS AND RINGS Coiled
Page 176 and 177: Metric Rolled Spring Pins • Meets
Page 178 and 179: TOOL CLIPS A A. Tool Clip - Type No
Page 180 and 181: SPRING - LOADED DEVICES PLUNGERS De
Page 184 and 185: PACKAGED ASSORTMENTS STOCK WAVE SPR
Page 186 and 187: PACKAGED ASSORTMENTS STOCK EXTENSIO
Page 188 and 189: PACKAGED ASSORTMENTS COMPRESSIONS S
Page 190 and 191: PACKAGED ASSORTMENTS EXTENSION SPRI
Page 192 and 193: MECHANICAL COMPRESSION SPRING STRUT
Page 194 and 195: HANDLES STEEL CORE MOLDED GRAB HAND
Page 196 and 197: HANDLES ASSIST HANDLE • 5/8” di
Page 198 and 199: HANDLES ACTIVATING HANDLE • Zinc
Page 200 and 201: HANDLES TWO POINT KEY-LOCKING STEEL
Page 202 and 203: LATCHES & CATCHES ROTARY PADDLE LAT
Page 204 and 205: LATCHES & CATCHES - RODS & ROD GUID
Page 206 and 207: LATCHES & CATCHES STANDARD CAMS •
Page 208 and 209: LATCHES & CATCHES TOUCH LATCH • N
Page 210 and 211: LATCHES & CATCHES SPRING BOLT LATCH
Page 212 and 213: LATCHES & CATCHES STRIKE • Chrome
Page 214 and 215: CHECKS, HOLDERS & PROPS STANDARD DO
Page 216 and 217: CHECKS, HOLDERS & PROPS TELESCOPIC
Page 218 and 219: DRAWER SLIDES DS-300 SERIES • Zin
Page 220 and 221: DRAWER SLIDES DS-SSR1 SERIES • 30
Page 222 and 223: ALMEN STRIPS FROM ASSOCIATED SPRING
Page 224 and 225: Associated Spring Raymond - SPEC ha
Page 226 and 227: TERMS OF SALE 1. With respect to go
Page 228: Associated Spring-Raymond United St
show all

Springs and Spring Washers - Electronic Fasteners Inc

Create successful ePaper yourself

Delete template?

Save as template?