Springs and Spring Washers - Electronic Fasteners Inc

Proven
Performance
from
Associated
Spring-Raymond
Associated Spring-Raymond’s Almen strips and supplies are built for high quality and long service. All
of our Almen strips are certified to SAE J442 or AMS 2432 standards for use in the automotive or aerospace
industries, as well as in any shot peening process.
Immediate delivery is available for N and A type strips in 50-count packaging and C type Almen strips
in 25-count packages. Bulk packaging is also available.
Premium Grade Almen Strips (per SAE J442)
Part Number Strip Type Thickness (in/mm) Flatness* Hardness
AS-N-PREM N .031 (.79) ± .001 (.025) ±0.0010 (0.025) HRA 72.5-76
AS-A-PREM A .051 (1.30) ± .001 (.025) ±0.0010 (0.025) HRC 44-50
AS-C-PREM C .094 (2.39) ± .001 (.025) ±0.0010 (0.025) HRC 44-50
Aerospace Grade Almen Strips (per AMS-2432)
Part Number Strip Type Thickness (in/mm) Flatness* Hardness
AS-N-AERO N .031 (.79) ± .0005 (.013) ±0.0005 (0.013) HRA 73–74.5
AS-A-AERO A .051 (1.30) ± .0005 (.013) ±0.0005 (0.013) HRC 45-48
AS-C-AERO C .094 (2.39) ± .0005 (.013) ±0.0005 (0.013) HRC 45-48
*as measured with Almen #2 gauge
Material: SAE/AISI 1070 cold rolled steel
Length: 3.00” ±0.015” (76.2 ±0.38mm)
Width: 0.745”-0.750” (18.92-19.05mm)
Almen Strip Holders and Socket Head Cap Screws
Stock Precision Engineered Components
®
Part Number
AS-HOLD-14
Product
Almen strip holder per SAE J442
495029 Socket head cap screws for holder
Our socket head cap screws are 15 percent stronger than the industry standard. In addition, they offer
213 ksi (1470 Mpa) minimum tensile strength
191 ksi (1317 Mpa) minimum yield strength
40 HRC minimum hardness
Almen Strip Test Gauges
Part Number
Product
AS-GAUGE-1
AS-CALIB-F
AS-CALIB-C
Almen strip gauge – standard
Test gauge calibration block – flat
Test gauge calibration block – curved
TO ORDER: WWW.ASRAYMOND.COM OR SEE PHONE & FAX NUMBERS ON BACK COVER
221