TRITON Le Basic guide - Korg

20
Selecting and playing a program
In Program mode you can select and play a program
from banks A–D, G, g(d). Here we will show how to
select preset programs. Select various programs and
hear how they sound.
Selecting a program
1 Press the [PROG] key (the key will light).
You will enter Program mode. Make sure that the
upper line of the LCD screen indicates “PROG 1.1:
Play.”
Category
Program Bank
Program Select
Selecting a program number
2 Make sure that “Program Select” is selected.
If it is not selected, use the cursor keys [ ], [ ],
[ ], [ ] to highlight the program name in “Program
Select.”
3 Use the VALUE controllers to select the program
that you wish to play.
You can use the following methods to select a program.
• Rotate the [VALUE] dial.
• Press the [INC] or [DEC] key.
• Use numeric keys [0]–[9] to specify the number,
and press the [ENTER] key.
4 Audition the sound.
Play a note on the keyboard to hear the sound you
selected.
Alternatively, you can press the [AUDITION] key
(the key will light) to turn on the Audition function
and the TRITON Le will automatically play a riff
(phrase) suitable for the selected program.
With the factory settings, the Audition function
can be used only on the preloaded programs of
banks A–C, D000–063, and the preset programs G,
g(d).
Selecting the program bank
In Program mode, you can switch banks to select programs
from another bank.
With the factory settings, banks A, B, C, D000–063 and
G, g(d) contain programs. (☞ table bellow)
5 Press a BANK [A]–[GM] key to select a bank.
The key will light, and the selected bank will be displayed
in the left of the LCD screen. For example to
select bank B, press the BANK [B] key. (The [B] key
will light, and the upper left of the LCD screen will
indicate Bank B.)
Bank Prog. No. Explanation
A, B, C
D
000…127
000…063
for preloaded programs
D 064…127 for user programs
G 001…128 GM programs
g(d) (☞VNL) GM2 drum programs
A, B, C, D000–063
With the factory settings, these banks contain
a wide variety of preloaded programs that
use the internal PCM ROM multisamples,
effects, and arpeggio patterns.
D064–127
With the factory settings, these banks do not
contain programs. Programs you yourself
create can be stored in these banks.
128 programs can be written or rewritten to each bank
A–D (for a total of 512).
G, g(d) These banks contain 128 GM programs and 9
GM drum programs that are compatible
with the GM sound map. The programs of
these banks are read-only. Bank G contains
the GM programs. G lets you select 128 programs
numbered from 001–128, and g(d) lets
you select nine drum programs (☞VNL).
Each time you press the [GM] key, the bank
will alternate as shown below.
G→g(d)→G→g(d)→G…
☞ For details of the program names etc., refer to
“VNL” (Voice Name List).