2013 PDF Catalog - Look Cycle
2013 PDF Catalog - Look Cycle
2013 PDF Catalog - Look Cycle
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
54<br />
55<br />
920 TECHNOLOGy<br />
The 920 is the first MTB to feature LOOK integration technology.<br />
Thanks to the A-Stem, it offers optimum steering precision and handling. All<br />
details have been taken care of when designing this frame to give you lightweight,<br />
efficiency and rigidity.<br />
A-STEM<br />
The 920 innovates by incorporating our<br />
direct drive concept in its MTB version.<br />
The direct drive concept refers to the<br />
optimization of the cockpit with the goal<br />
of rigidity, reliability and safety to reach a<br />
maximum performance level. We arrive at<br />
this result through the use of a short and<br />
tapered head tube (1 1/2 ” below and 1 1/8 ”<br />
above) and the suppression of spacers since<br />
the adjustment of the handlebars’ height is<br />
now done through the use of our A-Stem.<br />
SINGLE<br />
PIVOT<br />
KINEMATICS<br />
The kinematics of the 920 is of single-pivot<br />
type with tip over rocker.<br />
The main pivot point was precisely<br />
positioned to obtain the desired rear wheel<br />
path, the geometry and the position of the<br />
rocker were subject to long hours of work<br />
and of numerous tests to obtain the shock<br />
FULLy SUSPENDED<br />
CARBON<br />
FRAME<br />
absorption ratio curves and thus the desired<br />
path of the rear suspension, resulting in<br />
a high level of rigidity and an exemplary<br />
behaviour.<br />
Our experience in the use of carbon allowed<br />
us to continue further: we replaced the pivot<br />
point located on the stays by an accurately<br />
calculated flat section that allows us to<br />
do without rolling bearing, the stays bend<br />
when the suspension operates offering an<br />
unequalled level of reliability. We thus obtain<br />
more laterally rigid stays, which is easier<br />
and does not require more maintenance.<br />
All the components of the 920 Kit carbon<br />
are made of carbon, from the single-piece<br />
front triangle to the asymmetric rear triangle,<br />
including its rocker and its seatpost, you<br />
thus fully profit of the performance level and<br />
lightness that our control of carbon procures.<br />
PROTECTIONS<br />
Once again, LOOK has not overlooked<br />
the protection of your MTB frame, the<br />
920 has our moulded metallic protection<br />
in the diagonal tube, we have added a<br />
cable guide under the bottom bracket that<br />
acts as a “shoe” as well as an aluminium<br />
protection on the right base at plates level<br />
to prevent damaging the carbon in case of<br />
chain lifts.<br />
CARBON<br />
ROCKER<br />
The carbon rocker allows a gain of 50gr in<br />
relation to its aluminium counterpart, it is the<br />
final optimisation touch for this upper range<br />
version of the 920 on which every ounce<br />
counts.<br />
Scan to see<br />
the 920 video