Bruksanvisning för cykelkärra Bruksanvisning for sykkelvogn ... - Jula

ENGLISH
The bicycle trailer comes partly assembled.
1. Fit the wheels on the frame. Make sure the wheels are securely tightened.
2. Fit the reflectors on the wheels. Make sure the reflective side is facing out.
3. Fit the drawbar to the frame. Secure it in place with bolts, washers and nuts (10 and 11). Make
sure the bolts are securely tightened.
4. Fit the reflectors on the trailer. The orange reflectors must be on the sides of the trailer.
5. Fit the coupling onto the saddle post.
6. Pull the coupling release lever backwards and attach the drawbar in the coupling. Make sure the
drawbar is mounted correctly in the coupling.
Coupling
1. Saddle
2. Saddle tube
3. Mounting screw
4. Catch
5. Coupling
6. Safety screw
7. Support
1. The enclosed coupling (with support) must be installed on the saddle bracket.
2. By pulling back the spring-action catch, the drawbar can be connected with the coupling.
3. Secure the connection by screwing in the eye screw (on the side of the coupling) and securing it with
the lock nut.
12