Owner's Manual (DP-900_OM.pdf) - Roland
Owner's Manual (DP-900_OM.pdf) - Roland
Owner's Manual (DP-900_OM.pdf) - Roland
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Connecting External Devices<br />
Connection Examples<br />
921<br />
* To prevent malfunction and/or damage to speakers or other<br />
devices, always turn down the volume, and turn off the power<br />
on all devices before making any connections.<br />
Playing the <strong>DP</strong>-<strong>900</strong> from a MIDI sequencer/Recording<br />
an <strong>DP</strong>-<strong>900</strong> performance on a MIDI sequencer<br />
fig.midi2.e<br />
MT Series<br />
Out<br />
MIDI<br />
In<br />
* MT-90s has no MIDI Out connector.<br />
Making MIDI-related Settings<br />
Here’s how you can set the transmit channel and other MIDIrelated<br />
settings.<br />
How to enter function mode<br />
1. Hold down the [Metronome] button and press<br />
the [Beat] button.<br />
The indicators of the buttons you pressed will blink, and<br />
you will enter function mode.<br />
The display will indicate the value of the currently<br />
selected function.<br />
<strong>DP</strong>-<strong>900</strong><br />
* Set Local Off if you have connected the <strong>DP</strong>-<strong>900</strong> to a MIDI<br />
sequencer. Refer to “Switching Local Control on and Off” (p.<br />
36). Also set your MIDI sequencer to MIDI Thru mode (so that<br />
messages received at MIDI IN will be re-transmitted without<br />
change from MIDI OUT). For details, refer to the owner’s<br />
manual of your MIDI sequencer.<br />
Perform on the <strong>DP</strong>-<strong>900</strong> to play a MIDI sound generator<br />
fig.midi1.e<br />
Sound Module<br />
Setting various functions<br />
2. Press the button to which the desired function<br />
is assigned.<br />
The indicator of the button you pressed will blink.<br />
For details on the contents of each function, refer to the<br />
explanations that follow.<br />
3. Press the [+] or [-] button to change the value.<br />
If you press the [+] and [-] buttons simultaneously, the<br />
setting will return to the original value.<br />
How to exit function mode<br />
4. Press either the [Metronome] button or the<br />
[Beat] button.<br />
The button’s indicator will return to the previous state.<br />
THRU<br />
MIDI<br />
OUT<br />
IN<br />
<strong>DP</strong>-<strong>900</strong><br />
■ MIDI Send Channel Settings<br />
MIDI features sixteen MIDI channels, numbered 1-16. Simply<br />
connecting a cable is not enough for communication to take<br />
place. The connected devices must be set to use the same MIDI<br />
channels. Otherwise, no sound will be produced, and no<br />
sounds can be selected.<br />
* The <strong>DP</strong>-<strong>900</strong> receives all channels 1-16.<br />
* If you are using Dual play (p. 17) or Split play (p. 18) on the<br />
<strong>DP</strong>-<strong>900</strong>, only the channel you specify here will be transmitted.<br />
If you press the [Strings] button in step 2 of “Making MIDIrelated<br />
settings,” a display like the following will appear.<br />
fig.disp-1<br />
Value 1-16<br />
Power-up default setting 1<br />
35