ROPE - Rescue Consulting Canada

PMI PIT VIPER HARNESS
This caving harness features a low profile and very
low frontal attachment point, making it an excellent
choice for cave exploration or cave rescue.
Designed to work with the Frog chest harness.
Key Features:
Adjustable waist and leg loops . Abrasion guards
over the backs of each leg loops . Two gear loops .
Add your own 10 mm screw link to close the front
Weight: 1.2 lbs (532 g)
Standard
SG51038 $85.00
Large
SG51046 $85.00
heightec-PMI TM X-IT CASUALTY HARNESS
The X-it casualty rescue harness is a compact harness
which converts from underarm sling to sit harness
while subject is suspended.
Key Features:
Double action safety hook . Easily operated while
wearing gloves . Folds away in outer pocket
Weight: 2.56 lbs (1.16 kg)
SG51203 $199.00
The X-IT Harness folds easily
for use as an underarm sling
or storage..
PMI CHEST ROLLER HARNESS
A stand alone chest harness for mounting the
PMI single or double chest roller assembly (pg.
63). The ingenious strap system lets you raise the
roller higher on your chest by pulling down on
the straps, while chest strap pulls to the front to
tighten - no sewing required. Not a life safety
harness.
Key Features:
Three adjustment points for a snug fit . Extra wide
padding on the back . Available in two sizes .
Easily adjustable for any chest roller
Weight: 1.2 lbs (532 g)
Standard (30”- 40”)
SG51183 $49.00
Large (40”- 50”)
SG51184 $56.00
heightec-PMI TM OCTO CHEST HARNESS
Standard chest harness with double adjustment
buckles. Use with Plexus link and Eclipse or Shadow
sit harness to make an approved EN 361 full body
fall arrest harness.
Key Features:
Firm webbing for shape and support . Adjustable
up to 48"
Weight: 11 oz (310 g)
SG51205 $57.00
PMI FROG CHEST HARNESS
Standard chest harness with double adjustment
buckles. Use with Plexus link and Eclipse or Shadow
sit harness to make an approved EN 361 full body
fall arrest harness.
Key Features:
Firm webbing for shape and support . Adjustable
up to 48"
Weight: 11 oz (310 g)
SG51205 $57.00
PMI HASTY HARNESS
This simple and secure evacuation seat is specially
designed to be lightweight, efficient, and easy to
put on a patient in distress. The split center piece
of the triangle design conforms to the wearer and
is surprisingly comfortable, even for an extended
ride.
Key Features:
Easy to attach and secure to patient . Alternative
attachment points for children or small adults
Weight: 3.08 lbs (1.4 kg)
SG51114 $149.00
SPREADER BAR
A spreader bar should be used any time someone
is being lifted by shoulder attachment points such
as those on the PMI Avatar (pg. 34) or the PMI CS
Tech (pg. 36). Lifting without using a spreader bar
will cause the shoulder straps to pinch at the neck.
Key Features:
Nylon web Y lanyard . Center D ring . 3/4” (1.2
cm) snap hooks on both ends
Weight: 2.2 lbs (1 kg)
HD26050 $69.25
39