ROPE - Rescue Consulting Canada

heightec-PMI TM FALL ARREST
PERSONAL SOLUTION
This system is intended for use when suitable anchors are positioned close
to the work area, such as scaffolding or structural supports. If these are not
present, it may be possible to use temporary anchors such as deadweight’s or
slings. This Kit features the Nexus Twin point harness which includes a frontal
attachment to facilitate self rescue.
Energy absorber features the Safety Step Energy Absorber foot loop that
automatically deploys when energy absorber is activated. (See pg. 30)
Solution Features:
1 - Nexus twin point harness
1 - Lanyard with scaffold hook
1 - PMI Advantage helmet
1 - Safety Step Energy Absorber
1 - Carrying bag
KT36110 $449.00 CERTIFIED ANSI Z359.1, 2007
heightec-PMI TM ROPE ACCESS
PERSONAL SOLUTION
Rope access technicians must be specially trained and certified, and must
be well versed in regulatory issues. Safe practices for Rope Access require
development of an Access Permit that addresses risk assessment, and use of
appropriate equipment, techniques, trained personnel, and provision for rescue.
The heightec-PMI TM Rope Access Personal Kit contains all the basic needs
for a rope access technician, and is versatile and adaptable to virtually any
worksite. Visit www.sprat.org for more information on rope access.
Solution Features:
6 - ANSI Autolocking Carabiners
1 - 6mm delta screw link
2 - 8mm long oval screwlink
1 - Prism Descender
1 - Twist ascender
1 - Pulsar Handled Ascender
1 - Matrix harness with modular front connection
3 - Sewn Dynamic Cowstail Lanyards
1 - Tensor Twin Lanyard, 1.25 m
1 - 4-Step Etrier
1 - ANSI Z89 rated Alto Helmet
1 - 10 cm dyneema sling
1 - Carrying Bag
KT36112 $1,410.00
75