ROPE - Rescue Consulting Canada

More documents

Recommendations

Info

PMI ADVANTAGE For classic styling, maximum comfort and minimum impact, PMI Advantage offers industrial Kevlar head protection and plenty of detail oriented comfort. Fully adjustable ratchet headband and straps make this a helmet for almost any size head. CERTIFIED NFPA 1951, ANSI Z89.1 Key Features: Fully adjustable . Three point chinstrap . Headlamp retainer . Goggle mount Size: 54-64 cm Weight: 1.25 lbs (567 g) Orange Red Blue White Fluorescent Green HL33011 HL33012 HL33013 HL33014 $135.00 HL33018 $155.00 The NFPA Advantage now comes with clips to attach earmuffs. PMI VENTILATOR This light duty rescue helmet has all of the features of the Advantage, but has an added vent for those jobs when you need the protection of the Kevlar shell along with a breeze. Key Features: Kevlar shell . Three point chinstrap . Headlamp retainer . Earmuff clip . Reflectors . Fully adjustable Size: 54-64 cm Weight: 1.15 lbs (522 g) CERTIFIED ANSI Z89.1 Silver Red HL33060 HL33068 $145.00 HELMET FIT A comfortable, well-fitting helmet that is designed specifically for vertical work is essential. Helmets must have a secure chin strap and a three-point suspension to keep the helmet on the head when it is needed most. A three point suspension refers to a helmet with webbing support points on both sides of the helmet and at the rear. The chin strap should also be designed so that a relatively high force is required to cause a release. This helps keep the helmet on the user’s head in a tumbling fall. The inside suspension of the helmet should hold the shell away from the skull during a blow to the helmet and should provide air circulation and comfort, particularly during hot weather. The shell should have the rigidity to resist impact to the helmet and penetration by sharp objects but be flexible enough to absorb some of the blow that otherwise would be directly transmitted to the skull and spine. PMI POD Excellent for vertical work and confined space operations, the POD is versatile, lightweight, and features a built in light pod that accepts the intrinsically safe UK4AA Light (sold separately, pg 45). Key Features: Three point chinstrap . Flash light POD . Goggle mount Size: 54-64 cm Weight: 1.15 lbs (522 g) CERTIFIED ANSI Z89.1 Red White HL33025 HL33026 $131.00 40
USAR HELMET PMI is proud to offer this unique rescue helmet, compliant with the newest NFPA 1951: Standard on Protective Ensembles for Technical Rescue Operations such as a Rescue and Recovery Technical Rescue Protective Helmet. Key Features: Ventilated Kevlar ® RTM . Full head polyurethane impact liner . Leather ratchet headband . Leather crown comfort cap . Nomex chinstrap Size: 54-64 cm CERTIFIED NFPA 1951, ANSI Z89.1 Weight: 2 lbs (908 g) White Red Yellow Black HL33037 HL33038 HL33039 HL33041 $288.00 CERTIFIED CE PMI ALTO Not just a modifi ed rock climber’s helmet, PMI’s improved lightweight technical helmet is fully adjustable and sits securely on the head. Not for protection against electrical shock hazards. Key Features: Lightweight . Three point suspension . Headlamp or goggle retainer . Cloth chinstrap Size: 54-64 cm Weight: 1.08 lbs (490 g) White HL33015 $85.00 SELECTING A WATER RESCUE HELMET The best means of protecting your head will vary at any given time, depending on just where your head is located. That’s why you’ll find different helmets for different applications. When you are fighting structural fires, use a structural firefighting helmet. For high angle rescue, use a high angle rescue helmet. Likewise, a water rescue helmet should be used for water rescue activities. Not all water rescue helmets are the same. PMI offers two different water rescue helmet options, depending on your intended use. Swiftwater: PMI’s Current helmet offers a superior, customized fit, a low profile, and it stays in place – even in fast moving water. Designed by the Whitewater Research and Safety Institute explicitly for white water, the Current offers unsurpassed protection in fast moving water. CERTIFIED CE, EN 1386 PMI’S CURRENT HELMET - FROM WRSI The Current features a multi-impact design built with safety in mind for rapid water rescue. The 4 layer shell design is the first of its kind. Adjusts to fit every team member with adjustable O-Brace tabs. This lightweight and low profile helmet is a value, but most importantly the safest swiftwater helmet out there. Key Features: 4 layer shell system design . Fully adjustable to fit any rescuer . Patented retention system, featuring a continuous strap . Comes with three interchangeable foam inserts . Comes with optional ear guards Weight: Vented - 1.55 lbs (703 g) Non Vented - 1.6 lbs (726 g) Mellow Yellow Grey Vented HL33062 HL33064 $87.95 41
Page 1 and 2: ® ® ® www.pmirope.com #2010
Page 3 and 4: A DAY IN THE LIFE.......... PMI rop
Page 5 and 6: LIFE SAFETY ROPE No single type of
Page 7 and 8: PMI ROPE CLASSIC PROFESSIONAL Diame
Page 9 and 10: 12.5 mm (1/2”) PMI 12.5 mm is the
Page 11 and 12: PMI ISOSTATIC A PMI signature rope
Page 13 and 14: PERSONAL ESCAPE ROPE Personal escap
Page 15 and 16: CERTIFIED CI1801 PMI CLASSIC SPORT
Page 17 and 18: PMI H2-THROW Lightweight nylon thro
Page 19 and 20: PROTECT YOUR ROPE Avoid doing thing
Page 21 and 22: TUFF CORD (7 mm) A great choice for
Page 23 and 24: PMI EDGE ROLLER SYSTEM Three linked
Page 25 and 26: WHIP END DIP Seal your rope ends to
Page 27 and 28: SEWN WEBBING LOOPS Pre - sewn webbi
Page 29 and 30: PMI CHOKER SLING Wrapped around a b
Page 31 and 32: PMI BYO LANYARD Although there are
Page 33 and 34: WORK POSITIONING ACCESSORIES CERTIF
Page 35 and 36: heightec-PMI TM Matrix For innovati
Page 37 and 38: heightec-PMI TM PHOENIX HARNESS Thi
Page 39: PMI PIT VIPER HARNESS This caving h
Page 43 and 44: PELTOR EAR PROTECTORS Peltor helmet
Page 45 and 46: SPOT The streamlined Spot produces
Page 47 and 48: LIGHTWEIGHT RAPPEL GLOVES The origi
Page 49 and 50: PMI UNIFORM BELT PMI’s Uniform Be
Page 51 and 52: BERRY COMPLIANT SMC LITE STEEL SMC
Page 53 and 54: SMC ALUMINUM LOCKING D This carabin
Page 55 and 56: SMC KOOTENAY HX PULLEY The new Koot
Page 57 and 58: PMI/SMC GRIP This rope grab is a so
Page 59 and 60: PMI/SMC Deluxe HAUL SYSTEM Compact
Page 61 and 62: Mix and match the components on thi
Page 63 and 64: CERTIFIED EN 341:1993, Type D heigh
Page 65 and 66: SMC SPIDER The SMC Spider is an Aut
Page 67 and 68: SMC RESCUE SWIVEL This Rescue Swive
Page 69 and 70: Entirely unique to the TerrAdaptor
Page 71 and 72: FLEXIBLE SIDED LADDERS Flexible sid
Page 73 and 74: DESIGNED, BUILT AND TESTED FOR RESC
Page 75 and 76: heightec-PMI TM FALL ARREST PERSONA
Page 77 and 78: REACH ROPE RETRIEVER The Reach Rope
Page 79 and 80: CASCADE PROFESSIONAL TITANIUM LITTE
Page 81 and 82: LITTER SKIN Beauty that is more tha
Page 83 and 84: OREGON SPINE SPLINT Oregon Spine Sp
Page 85 and 86: CASCADE LEVITATOR Patient Transport
Page 87 and 88: Cascade GUARDIAN LITTER SHIELD A co
Page 89 and 90: LAERDAL BAXSTRAP SPINEBOARD As a re
Page 91 and 92:
USAR TASKFORCE KIT The USAR (Urban
Page 93 and 94:
PMI ROPE BAGS PMI’s exclusive com
Page 95 and 96:
PMI RIGGERS BAG Storing gear can be
Page 97 and 98:
LAERDAL TUFF-KELLY Weighted realist
Page 99 and 100:
Robert J. Koester has been active i
Page 101 and 102:
PMI Two Toned Cap This 100% cotton
Page 103 and 104:
A Accessory Cord 20-21 Advantage He
show all

ROPE - Rescue Consulting Canada

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?