27.11.2014 Views

4.4 initial diagnostic check: icm - harley-davidson-sweden.se

4.4 initial diagnostic check: icm - harley-davidson-sweden.se

4.4 initial diagnostic check: icm - harley-davidson-sweden.se

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

HOME<br />

Test 4.11<br />

NO SPARK/NO ICM POWER<br />

1<br />

Check Ignition<br />

Fu<strong>se</strong>. Is Fu<strong>se</strong><br />

OK?<br />

NO<br />

Replace Fu<strong>se</strong><br />

and Find<br />

Source of Fault.<br />

2<br />

3<br />

YES<br />

Connect Breakout Box. With Ignition<br />

ON, Place Multimeter Red<br />

Wire to Terminal 1 of Connector<br />

[10] on Breakout Box, Multimeter<br />

Black Wire to Terminal 5 of Connector<br />

[10] on Breakout Box. Is<br />

Voltage 12V± 1.0V.?<br />

YES<br />

NO<br />

Replace ICM.<br />

3<br />

Check Continuity Between Terminal<br />

5 of Connector [10] on Breakout Box<br />

and Ground. Continuity Pre<strong>se</strong>nt in<br />

Both Places?<br />

NO<br />

Repair Open in BK<br />

Wire (Pin 5) to<br />

Ground.<br />

3<br />

4<br />

YES<br />

Check Continuity Between Pin<br />

4 (W/BK) of Connector [22A]<br />

and Terminal 1 of Connector<br />

[10] on Breakout Box.<br />

Is Continuity Pre<strong>se</strong>nt?<br />

3<br />

YES<br />

Check Continuity<br />

Between Sockets 4<br />

(W/BK) and 3 (GY) of<br />

Connector [22B]. With<br />

Engine Stop Switch<br />

ON, Is Continuity<br />

Pre<strong>se</strong>nt?<br />

NO<br />

Locate and Repair<br />

Open in W/BK Wire<br />

Between Connectors<br />

[22] and [10].<br />

YES<br />

Locate and Repair<br />

Open in GY Wire<br />

Between Connector<br />

[22A] and Fu<strong>se</strong> Block.<br />

NO<br />

Replace<br />

Engine Stop<br />

Switch.<br />

Table 4-12. Wire Harness Connectors in Figure 4-21.<br />

NO. DESCRIPTION MODEL TYPE LOCATION<br />

[1]<br />

Main to Interconnect<br />

Harness<br />

FLHT/C 12-Place Deutsch (Black) Inner Fairing - Right Radio Support Bracket<br />

[8] Ignition Harness All 12-Place Deutsch Under Right Side Cover<br />

[10] Ignition Control Module All 12-Place Deutsch (Black) Under Right Side Cover<br />

[22]<br />

Interconnect to Right<br />

Handlebar Switch Controls<br />

FLHT/C 12-Place Deutsch Inner Fairing- Right Fairing Support Brace<br />

FLHR/S 6-Place Deutsch Inside Headlamp Nacelle<br />

2004 Touring: Engine Management (Carbureted) 4-29

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!