Views
3 years ago

Welcome to Practical Components - Standard ICs

Welcome to Practical Components - Standard ICs

Personal Magnifiers

Personal Magnifiers Reduce Eyestrain—Evaluate Surface Features Quickly, Easily and Accurately With Mag-Eyes Personal Magnifiers. APPLICATIONS Electronics Schematics and Printed Circuit Board Assembly/Rework Manufacturing Tooling and Prototype Development Quality Control Gauging and Hands-on Parts Inspection Dentistry X-rays, Lab Work Manual Trades Jewelry Work, Watch Repair Science Sample Studies In Geology, Botany and Biology ➊ Feather-lite, only 50 Grams (1.75 oz.) ➋ Magnifier swings up and down, or can be locked in place ➌ Modern open design assures unimpaired vision ➍ Comfortable during long hours of use ➎ Slip-on cushioned headband ➏ For use with long or short hair ➐ Snap-out interchangeable acrylic lenses (2.5X and 4X) Features Instantly enlarges images and objects Hands-free magnification Can be worn with or without eye-glasses, contact lenses or safety glasses. Optical grade acrylic lenses Distortion-free viewing No Headaches: simple, comfortable and safe Double lens for 3D viewing Wide field of vision Adjustable lens angle One Size Fits All Order Numbers: 383 (Regular) $31.95 383-AS (Anti-Static) $39.95 ESD SAFE Model 383-AS ESD SAFE For electronics and clean room environments. The model 383-AS Anti Static Mag-Eyes has all the advanced features of the model 383, but is specifically designed for work areas where Electro Static Discharge is to be avoided or when clean room standards must be met. To comply with these requirements, the 383-AS is molded from solid-state semiconductive material chemically bonded into polymer matrix and has these qualities: Color: black Surface resistivity—“Static Dissipative” range: 106–109 ohms/sq. Static protection is independent of humidity from 0% to 100%. Static resistivity and static decay rate are unaffected by temperature. Static protection is maintained throughout entire life of material. Tribo-electric charging < 20 v. Contains no amine or amide based volatile additives and will not contaminate component surfaces. Clean room compatible, no sloughing—the particle counts are substantially below those limits set for Class 10 clean rooms. Meets stringent German standards for recyclability. Each unit is shipped complete with 2 lenses (2.5X and 4X) and instruction sheet. 48 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • klpci@worldnet.att.net • www.practicalcomponents.com

Adjustable Matrix Trays Combination tray shown with quadpack and flatpack supports is for illustration only. Features Hold any size quadpack or flatpack up to 4" long. Plastic supports are molded in PPA with carbon fiber with a surface resistivity of 10E5-10E7 ohm/ch, are non-sloughing and tolerate 170C. Tray and cover are extruded aluminum, finished in ESD safe, clear chromate. ESD foam with conductive film in the cover for cushioning and component thickness variations. Standard unit measures 6" x 12" x 1" with cover. Thumb screws lock the cover to the base. Standoffs on each end for easy location and locking to the cover. Patent No. 5,370,225. Optional Pick and Place Mode Quads only, must be square. Orients devices in accurately registered X–Y positions. Interfaces with standard pick and place machines, e.g. Zevatech, Fuji, Quad, etc. Overall length of .400" less cover. Maximum Capacity For Square Quadpacks Maximum Body Number of Pieces Dimensions Per Row .580 inches ............ 7 1.026 inches ............ 6 1.480 inches ............ 5 1.875 inches ............ 4 2.125 inches ............ 3 Order Numbers: Product Order Number Price Base w/cover for 10 Quadpacks ........................AMT-6x12 QP .......... $185.50 Base w/cover for 10 Flatpacks ...........................AMT-6x12 FP ............. 185.50 Base w/cover for bottom brazed pkgs. ..............AMT-6x12 QP-B ......... 295.00 Base w/cover P&P for automation (QFP) ...........AMT-6x12 QP-A ......... 325.00 Base, no cover, no supports ..............................AMT-B1 ........................ 68.90 Cover only with anti-static foam .........................AMT-C1 ........................ 47.40 Anti-static foam .................................................AMT-A1 .......................... 5.30 Quadpack molded support w/hardware .............AMT-QP ......................... 3.81 Flatpack molded support w/hardware ................AMT-SS.......................... 3.81 Note Call for quantity price breaks. Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • klpci@worldnet.att.net • www.practicalcomponents.com 49

DATA SHEET - TME Electronic Components
RF Flex Lite (759KB) - Wes-Garde Components
Interfacing Components, Spring Contacts and Mating Contact Lands
Risk analysis Risk reduction EN 746, Component standards ...
Standard-compliant components for photovoltaic systems - Siemens
Component Standard Research & Development - DOE Hydrogen ...
NSF/ANSI Standard 46 - Evaluation of Components and Devices ...
Quick Solutions for Standard Products, Components and Spare Parts.
HSK-standard cable glands - Anixter Components
Automatic Print Offset Placement Compensation 01005 Components
SURFACE MOUNT COMPONENTS - KOA Speer Electronics
Validation of Professional Practice Components of Teacher ...
Pipe components to DIN / EN standards - Van Leeuwen
Quick Solutions for Standard Products, Components and Spare Parts.
Standards of Practice & Code of Ethics - NAHI
Interface Specifications - Standard ICs
A Practical Component Framework for Development of Scientific ...
Code of Practice for the Use of Electronic Components and PCBs in ...
Create precise, global-standard component footprints ... - Altium
SMT1212-03XH10 LF - BeStar Acoustic Components
Powell Capacitor Banks Standard and Optional Components ...
Standards for Collectors and Components in the pipeline
Practical Components Offers Dummy Amkor TMV® PoP (Package ...
C&K Components DIP switches - SM Elektronik